3 ms·
If you can shell out a little more, you might be able to print a Nevermore filter[1] and use activated carbon to filter VOCs, provided your printer is enclosed.
by precompute 4y ago
If you can shell out a little more, you might be able to print a Nevermore filter[1] and use activated carbon to filter VOCs, provided your printer is enclosed.
You could also buy a Bambu Labs P1P, which is fully enclosed, or build a Voron. There's also the Creality Sermoon V1, but with chinese printers you always have to replace / upgrade the parts, so they're really not that cheap in the long run.
1: https://github.com/nevermore3d/Nevermore_Micro https://github.com/nevermore3d/Nevermore_Micro
- bmitc 4y agoJust a note that the P1P does not come fully enclosed. You need to either print your own sides or buy them from someone. I don't think Bambu Lab even sells them, and even then they are just side panels and don't include the front. The Bambu Lab X1 Carbon comes fully enclosed, however. It is one of the main reasons that I am considering just going for the X1 Carbon. If the P1P had a fully enclosed option, I would go for it.
- precompute 4y agoThanks for the correction, I wrote that post off the top of my head. I definitely meant the X1, that's the printer I had in mind. And anyway, if you're printing PLA you shouldn't do it in a completely closed enclosure, the temperature would be too high (or so I've read). Even the Sermoon V1 has cutouts for a small vent at the back. Even the Vorons aren't fully enclosed, although there's the Box-Zero[1] addon that does fully enclose the printer. 1: https://github.com/zruncho3d/BoxZero https://github.com/zruncho3d/BoxZero