3 ms·
The original ATMEGA328p may have said in the datasheet that it could only do 20mA for 2 pins... But in reality, you can short all the pins to GND and then outp
by londons_explore 4y ago
The original ATMEGA328p may have said in the datasheet that it could only do 20mA for 2 pins...
But in reality, you can short all the pins to GND and then output high on all of them, and the chip survives indefinitely (although does get rather hot!).
It's really rather nice and robust.
- kevin_thibedeau 4y agoThe ATmega supports 40mA on any pin. This is about the Renesas part.
- formerly_proven 4y agoI think I killed only one AVR in a long time tinkering. They even tolerate pretty severe over-voltage well, probably because they support EEPROM-style parallel HV programming. However they're also pretty expensive (especially today, an m328p is over five bucks nowadays), and have been for around ten years or more.
- hungryforcodes 4y agoYou can do exactly the same to an ESP32 / 8266.