3 ms·
If I were to guess, this issue will be because metal tabs inside the cells were cut to shape with a stamping machine. The stamping machine die was probably wor
by londons_explore 4y ago
If I were to guess, this issue will be because metal tabs inside the cells were cut to shape with a stamping machine. The stamping machine die was probably worn, leaving burrs on the edges of the tabs. Those burrs are sharp and perforate plastic membranes, causing a short.
Lesson:. All stamped parts should be deburred.
- dboreham 4y agoDon't the drawings say "Debur all edges"?
- dsfyu404ed 4y ago>Lesson:. All stamped parts should be deburred. This take is like the manufacturing equivalent of when people say we need a law to prevent something that's already illegal. The run of parts was mostly in spec. All they have to do is change their tools a little more aggressively or tighten up the parameters on their existing QC process. Adding an extra step to a low margin high volume part where cost is dominated by number of operations in the manufacturing process is needless and wasteful when you can just do what you're already doing but at an ever so slightly higher level of quality.
- tomatotomato37 4y agoAlso for all we know they could already be doing this and the defect actually occured because of it, E.G. misaligned deburring head bending the metal into an edge