4 ms·
Fascinating. This material alone would be revolutionary if legitimate, although I’m sure there’d be further improvements. Question for any experts - what’s the
by UseofWeapons1 4y ago
Fascinating. This material alone would be revolutionary if legitimate, although I’m sure there’d be further improvements.
Question for any experts - what’s the relative difficulty of keeping something under sustained high pressure in a piece of hardware vs keeping it very cold?
Our ultra cold usages work decently well. Would it be any easier to keep a hardware component under pressure like what this new material requires?
- ReptileMan 4y agoThe second to holy grail is temperature above liquid nitrogen at around normal pressure with cheap and easy to obtain coolant. It will enable big things like really high voltage intercontinental transmission lines etc.
- moring 4y agoIs there some napkin math available on the net for a transmission line with a nitrogen-cooled high-temp superconductor (Tc > 90K) and thick thermal insulation? I mean for the energy required per km too keep it cooled below Tc.
- 13of40 4y ago...and how that compares to the energy loss you'd have from resistance in a regular cable.
- pfdietz 4y agoThe energy loss (in the sense of where the heat ends up) is at the refrigeration plant. The cable itself extracts heat from the environment. So SC cables make sense for underground cables, where heat buildup is a problem.
- ReptileMan 4y agoThe energy could be very low - after all we are really good at insulation.
- londons_explore 4y agoThey are of the same order of magnitude... Big high voltage transmission lines lose ~200 watts per meter in resistive losses when under full load. The electrical energy to keep something 1 meter long at liquid nitrogen temperatures is also ~200 watts, assuming 8 inches of insulation. The resistive losses go down with the square of the power transmitted - so they fall to zero rapidly when not under full load. Cooling losses stay approximately constant. Therefore, I suspect a liquid nitrogen cooled superconducting cable wouldn't work out financially. Math only correct to an order of magnitude...
- zardo 4y agoThe actual trade-off would have to be far better insulation e.g. double wall vacuum insulated stainless pipe. With much higher upfront costs.
- rini17 4y agoSo now you have two problems. Not only liquid nitrogen but also vacuum :)
- themeiguoren 4y agoThis is my own ignorance, but what determines the power carrying capacity of a wire besides melting from the resistance? Could you transmit a lot more wattage through that same line when superconducting?
- pfdietz 4y agoWe've had that for decades.
- zardo 4y agoWe've already got there with YbCO. But just barely, which means useful amounts of current and magnetic field density bring it out of the critical region.
- londons_explore 4y agoKeeping things cold is effectively an energy vs space tradeoff. For example, if you wanted to keep an underground superconducting wire cold, then you would send coolant pipes along it, and wrap it in an insulator. You need to put energy into chilling the coolant, inversely proportional to the thickness of the insulation. However, typically for most things humans want to do, the cooling cost works out higher than the energy lost to resistance in a non-superconductor, so, apart from a few specialist use cases (MRI machines, particle accelerators), superconductors have seen no use.