3 ms·
If you bought floppy drives at the tail end of their run and disks at the tail end of their run, then yes. Everything was engineered good enough to work a coupl
by toast0 4y ago
If you bought floppy drives at the tail end of their run and disks at the tail end of their run, then yes. Everything was engineered good enough to work a couple times and that was it, because files were too big and 1.44mb wasn't enough; 2.88 was Japan only; people were moving on to zip drives or ls-120 drives (which were also quite good at reading 1.44 media), cd-rs sometimes, and usb mass storage (with drives that are now comically small... I think my first was 16 MB)
If you had equipment from say 1990 and blank disks from then too and a reason to keep it running, it likely still is. Although floppy disk emulators are probably a reasonable retrofit in most applications.
- Brian_K_White 4y agoIt goes both ways. Things at the tail end are also optimised for cost so extremely and they were valued so little by the users by then that the latest stuff is junk. It ends up being that some manufacturers made good stuff and some made junk, but you don't know which until much later. I have a batch of nos nameless 3.5" 720k I got from floppydisk.com that are basically all junk. Fail to even verify a format, or maybe succeeds once and then fails within 3 uses. I have other even older, actually labelled as single sided 3.5", but made by Basf that just run and run and run. In fact most 8" are even more reliable than any of the later versions because a lot of 8" machines spun the disks the entire time the machine was on. All day every day at work that disk is just grinding away... so they had to be good just to be usable at all.
- kevin_thibedeau 4y ago2.88 ED disks were available in the US. They were obscenely expensive and few stores carried them.
- midoridensha 4y ago2.88 was pushed by IBM with their PS/2 line that tried to push the clones out of the market and take over with their own, very expensive, and completely proprietary PC computers. They came with 2.88MB drives, but no one else adopted them, or most other technologies included in the PS/2 line. So the disks stayed expensive and uncommon, and went nowhere.
- kevin_thibedeau 4y agoThere were 2.88 drives in non-PS/2 machines. They were just incredibly rare.
- midoridensha 4y agoYes, that's correct. Like some other things in PS/2 machines (such as the MCA bus), they weren't entirely closed to other vendors, and IBM was trying to push the 2.88s as the new floppy standard, but they never caught on like the other standards IBM pushed before then when IBM had more clout.