4 ms·
> > Despite all of the praise USB-C gets for its universal connector, there are a lot of problems with it too. It is nearly impossible to tell what capabilities
by giancarlostoro 4y ago
> > Despite all of the praise USB-C gets for its universal connector, there are a lot of problems with it too. It is nearly impossible to tell what capabilities a cable might have just by looking at it, which could potentially damage a product if connected in an unexpected way.
I wish USB C was forced to be color coded like USB 3 typically is. Some visual indicator that the drive you're using might be compatible, it might also not work as expected because the colors don't match.
- btown 4y agoDon't tell the electrical engineers; this is the pathway to color-code diagrams some may deem unnatural... https://eepower.com/resistor-guide/resistor-standards-and-codes/resistor-color-code/# https://eepower.com/resistor-guide/resistor-standards-and-co...
- nomercy400 4y agoI haven't touched resistors in years, but from what I can remember, it's just a rainbow, with darkred(=brown) and black before, and grey/white after. And gold/silver are modifiers.
- deleted 4y ago[deleted]
- ianburrell 4y agoColoring the specification would be nice. Have it either in a band or on connector. There is already blue color for USB3. Would need color for the USB-PD extra power and for USB4/Thunderbolt. Most cables are USB2 and don't need color.
- Night_Thastus 4y agoColor isn't sufficient, IMO. There's way too many possible combinations of speed and power. It's not nearly as simple as USB 3.0. They should just force every connector and cable to have a label on it that says the speed and power. Then, you'll always know for sure.
- ianburrell 4y agoThere aren't that many combinations. For speed, there is standard USB2, USB3, USB4/Thunderbolt. For USB3 speeds, using the existing logos would work. For power, there is standard 3A, and 5A. Each of those except the default would have a color. Most cables wouldn't have any color, most of rest would have one color, and at most two colors. Many of the combinations aren't used, like 5A is almost always used with USB2 charging cable.
- LorenPechtel 4y agoI was going to object to this but then I see you actually got it right but just unclear. Do it with stripes--one for speed, one for power.
- Night_Thastus 4y agoFor speeds, you are correct, there aren't too many: USB 3 speeds: 5, 10, 20 Gb/s USB 4 speeds: 40, 80 Gb/s But for power, it's all over the place. Every single cable and connector seems to have its own idea of what they want to do. It could be anywhere from: * 5V@100mA=0.5W (low power, with no power delivery standard) * 48V@5A=240W With a good dozen options in-between those two. The only unambiguous way is to just label them. One for speed in Gb/s, one for power in watts. Easy.
- ianburrell 4y agoThe power level is negotiated by the devices with Power Delivery. The cables only support 3A or 5A. The 3A cables can go up to 60W. The 5A cables are emarked so devices can recognize them and go to 100W. I hadn't realized there are new EPR cables that go up to 240W, I guess that is third kind.
- shagie 4y ago> The only unambiguous way is to just label them. One for speed in Gb/s, one for power in watts. Easy. They're trying - https://www.kensington.com/news/docking-connectivity-blog/usb-c-demystified/ https://www.kensington.com/news/docking-connectivity-blog/us... and https://mms.businesswire.com/media/20210930005098/en/911442/5/New+USB+Image_for_PR_FINAL_v2+%281%29.jpg?download=1&_gl=1*ojgku8*_ga*MTU1MjU3Nzk4Mi4xNjc3NzA2NjUx*_ga_ZQWF70T3FK*MTY3NzcwNjY1MS4xLjAuMTY3NzcwNjY1MS42MC4wLjA https://mms.businesswire.com/media/20210930005098/en/911442/.... It's nice that there are so many standards to chose from though. https://xkcd.com/927/ https://xkcd.com/927/