3 ms·
Mils are awesome for wire thicknesses, trace widths, pin spacings on circuit boards, fine drill bit sizes for through holes ... Guitar strings are, e.g. 9 to 4
by kazinator 4y ago
Mils are awesome for wire thicknesses, trace widths, pin spacings on circuit boards, fine drill bit sizes for through holes ...
Guitar strings are, e.g. 9 to 46: .009" high E, .046" low E.
Classic DIP (dual in-line package) integrated circuits and headers have 100 mil spacing: ten pins per inch. IIRC, you drill a 25 mil hole for the pins. This is international.
The metric system doesn't have a nice mil-like unit for those scales; the millimeter is way too crude, and micrometers are too fine.
The mil is just right for all sorts of miniature things that are still large enough to be worked on by human hands and eyes.
- Jedd 4y ago> The metric system doesn't have a nice mil-like unit for those scales; the millimetre is way too crude, and micrometres are too fine. This kind of absurd claim would be more compelling if you hadn't just used 3 decimal places and a quotation mark to define a distance in a format used by at most ~5% of all the people working in such scales: > ... 0.046" My point - metric can also use decimals. More adroitly, too, I'd argue, because of the consistency.
- kazinator 4y agoThat 0.046" is just called 46 mils though, or just 46 when that is understood. Those guitar strings are just "nine to forty-sixes" and that's it. If you're routing a circuit board, you have a grid that is a multiple of the mil: e.g. 25 mils, so if have a part with 100 mil pin spacing, that is four grid lines. Trace widths are multiples of a mil: 6 mil, 8 mil, ... through holes are mils: 25 mil, 40 mil, ... no decimal point or " mark in sight. Sure, a tenth of a mm would be a useful unit. Problem is, 0.1 mm has no name. It's either 0.1 mm or 100 microns, which are too small. I've not seen anyone define such a unit in practice; they just plod along with multiples of 0.1.
- guenthert 4y ago> Classic DIP (dual in-line package) integrated circuits and headers have 100 mil spacing: ten pins per inch. IIRC, you drill a 25 mil hole for the pins. This is international. But that's just a historic accident. Related, the metric system was forced upon trade in Germany not before the early seventies. Only few units previously used survived, e.g. the 'Pfund' (pound, now redefined as 'half kg'). My father continued to use 'Zoll' (inch) and lamented American made machinery using threads on nuts which differed from those used in Germany (and everywhere else). Even I know the folding carpenter's ruler only as 'Zollstock' (no one says 'Gliedermaßstab'). And while I used to be very opinionated about the imperial- vs. metric system, after twenty years in California, I feel comfortable at 75°Fahrenheit and am exhausted, if I have to walk more than a few miles. I even caught myself recently referring to a width as 'about a yard'...