4 ms·
The batteries are sealed lead acid AGMs. Where orientation isn't a concern because the electrolyte is gelified in fiberglass. Also, they shouldn't be off-gassin
by yardie 4y ago
The batteries are sealed lead acid AGMs. Where orientation isn't a concern because the electrolyte is gelified in fiberglass. Also, they shouldn't be off-gassing at all. That's the sealed part. I've had SLA batteries puff up. And if you are getting corrosion in and around the AP chassis you may have a leak.
Typically, what determines the life of these batteries is # of cycles and # of deep discharges. The more extreme the environment the shorter the life time. I have network equipment sit outdoors in a cabinet. The batteries typically last 24-36 months instead of the 48-60 months I see from indoor UPSes.
- toast0 4y agoorientation isn't supposed to be a concerned with SLA batteries, but it's probably nicer for them to be upright than not... when the seals do fail, it's better to have the electrolyte seep out and stay on top than seep out and drip onto something else.
- metadat 4y agoWow, outside? I recently had a Supermicro board die because it became infested with moths out in the garage, it was disgusting and the board was borked even after extensive cleaning. How do you keep wildlife at bay? (insects and rodents are attracted to heat and shelter). Maybe some kind of solid metal cabinet enclosure like the public utility boxes along some roadside thoroughfares?
- geerlingguy 4y agoIn a garage environment, using mesh everywhere and ensuring there are zero openings like an empty PCIe slot is the best solution. Outdoors you need special enclosures typically made for industrial computers; and many companies build special fanless enclosures that dump heat directly through the metal enclosure (it is basically the heat sink). Others have fan designs that have their intake and exhaust through filters on the bottom.
- metadat 4y agoYeah, I haven't yet researched what kind of mesh to use, any recommendations there? Thank you!
- geerlingguy 4y agoHonestly in a pinch I've used screen door mesh from the hardware store, and gaff tape. Otherwise, search online for 'PC dust mesh filter' and it usually is sold in rolls.
- yardie 4y agoThe circuit board for a UPS and the board for a motherboard aren't really the same. One is designed for high voltage/high current and conformal coated in epoxy. The later has much tighter tolerances and is optimized for low voltages/high frequencies. And it's probably not conformal coated.