5 ms·

This thing was announced May 2022, and since then the shipping date has been pushed back several times. Any indication it's finally going to be available? Rega

This thing was announced May 2022, and since then the shipping date has been pushed back several times. Any indication it's finally going to be available? Regardless - once this one comes out, I'd consider getting one, maybe on the second hand market. If you want an oscilloscope for audio purposes and are on a budget, you can go much cheaper - any of those $20 oscilloscopes on amazon will let you measure audio signals fine, although the displays are lower-resolution than I'd like for this purpose (and I'm not sure this one is much better in that respect). Conversely, for $200 you can get oscilloscopes with much better specs , many of them arguably overkill for audio purposes. That said, this one definitely has some attractive features for audio, specifically the form factor and I/O make it pretty convenient to just plug in (and pass through) a stereo signal without much fuss.

TomMasz 4y ago
Even an old 5 MHz scope will do for audio applications, though that generation is getting on in years and likely to be a problem to maintain.
- akimball 4y ago
  Usually just replacing capacitors
- kjs3 4y ago
  You'd be surprised. The older Tek <100MHz scopes I'm familiar with (like the 465) are pretty easy to work on and most of the parts are commodity. CRTs are starting to get harder to find, tho. Newer stuff is full of custom components and/or ASICs and you'll prolly have to cannibalize one to repair another these days. But I agree that the way to go now is to just get a $25 disposable scope from China off Amazon.
NikolaNovak 4y ago
Any recommendations on medium price oscilloscope? How do you hook it up - insert it into the 1/4" signal path? I've never used an oscilloscope so I fear I'll order something close sounding but completely wrong :)
- thomasjb 4y ago
  Used Hameg scopes are common and fairly inexpensive, as they were used a lot in schools (at least in my area), and their manuals are very good for learning about oscilloscopes. To hook up your 1/4" signal, add a splitter to your output, and use one side to drive whatever you're outputting to, and the other side to measure the signal on the oscilloscope. Ready made 1/4" to BNC adapters are available, so you don't even have to use oscilloscope probes
- labcomputer 4y ago
  Used Tektronix analog scopes would fit the bill, for around the same price as the Korg. 2200 series and 2400 series are probably the sweet spot in terms capability for money, weight, reliability and repairability. I particularly like the 2245 and 2445, which have basic (digital) measurement capabilities and digitally controlled attenuators. 2225 and 2215 are also solid options. I would stay away from the analog/digital hybrid and digital scopes from this series (243x, 2440, 2210, 2212, etc). T900 series scopes are good too, but have somewhat lower specs. 400 series scopes are just as capable as the 2200/2400, but much heavier, older and more likely to need re-capping. Some 400 series also have a not-very-good built in DMM. For audio work, you could also check out the 5000 series mainframe scopes, but that inevitably leads down the rabbit hole of wanting all the plugins (and there are many neat plugins!) There are also a ton of new $200-class digital scopes from china.
deleted 4y ago
[deleted]

TomMasz 4y ago

Even an old 5 MHz scope will do for audio applications, though that generation is getting on in years and likely to be a problem to maintain.

akimball 4y ago
Usually just replacing capacitors
kjs3 4y ago
You'd be surprised. The older Tek <100MHz scopes I'm familiar with (like the 465) are pretty easy to work on and most of the parts are commodity. CRTs are starting to get harder to find, tho. Newer stuff is full of custom components and/or ASICs and you'll prolly have to cannibalize one to repair another these days. But I agree that the way to go now is to just get a $25 disposable scope from China off Amazon.

NikolaNovak 4y ago

Any recommendations on medium price oscilloscope? How do you hook it up - insert it into the 1/4" signal path? I've never used an oscilloscope so I fear I'll order something close sounding but completely wrong :)

thomasjb 4y ago
Used Hameg scopes are common and fairly inexpensive, as they were used a lot in schools (at least in my area), and their manuals are very good for learning about oscilloscopes. To hook up your 1/4" signal, add a splitter to your output, and use one side to drive whatever you're outputting to, and the other side to measure the signal on the oscilloscope. Ready made 1/4" to BNC adapters are available, so you don't even have to use oscilloscope probes
labcomputer 4y ago
Used Tektronix analog scopes would fit the bill, for around the same price as the Korg. 2200 series and 2400 series are probably the sweet spot in terms capability for money, weight, reliability and repairability. I particularly like the 2245 and 2445, which have basic (digital) measurement capabilities and digitally controlled attenuators. 2225 and 2215 are also solid options. I would stay away from the analog/digital hybrid and digital scopes from this series (243x, 2440, 2210, 2212, etc). T900 series scopes are good too, but have somewhat lower specs. 400 series scopes are just as capable as the 2200/2400, but much heavier, older and more likely to need re-capping. Some 400 series also have a not-very-good built in DMM. For audio work, you could also check out the 5000 series mainframe scopes, but that inevitably leads down the rabbit hole of wanting all the plugins (and there are many neat plugins!) There are also a ton of new $200-class digital scopes from china.

deleted 4y ago

[deleted]