4 ms·
For those interested in toying around with SDI: Blackmagic Design (the same company that made the Video Assist monitor pictured in this repository's README.md)
by mschuster91 4y ago
For those interested in toying around with SDI: Blackmagic Design (the same company that made the Video Assist monitor pictured in this repository's README.md) also makes an SDI shield for Arduino that can be used to inject stuff into the SDI bitstream [1].
Additionally, if you take one of their Micro Converters apart, they're nothing more than a (powerful) FPGA and SerDes units for HDMI / SDI.
[1] https://www.blackmagicdesign.com/de/developer/product/arduino https://www.blackmagicdesign.com/de/developer/product/arduin...
- cpgxiii 4y agoPretty much every BMD product is FPGA based, either with a conventional FPGA or a hybrid like Zynq (ARM cores + FPGA). It clearly gives them a lot of design commonality in hardware and flexibility in behavior. It's a good example that you can still have a large range of products at low cost (compared to the rest of the industry) while leveraging fairly expensive generic parts (compared to ASICs).
- osamagirl69 4y agoThe blackmagic arduino sheild does not actually produce SDI video, it only allows you to insert out of band control data. If blackmagic were to release the FPGA firmware you could add the same capability that author did (hardware is essentially the same), but as it is you would still need a SDI video source such as the micro converter that you mentioned, and a HDMI test pattern generator to feed the converter.