3 ms·
"metal holder of the receiver" -> hook switch? You press it down to end the call, usually by "hanging up" the receiver. "the typical sound of a line ready" ->
by toast0 4y ago
"metal holder of the receiver" -> hook switch? You press it down to end the call, usually by "hanging up" the receiver.
"the typical sound of a line ready" -> dial tone?
What would you normally hear when you picked up the receiver on a payphone, before you inserted coins? In my US experience in the 90s, if I were using a payphone, I'd pick up, listen for dial tone, insert my coins, (hear the coi tones, dial tone would pause and come back, IIRC), then dial the number, etc. If I just dialed a number without insering coins, I'd get a recorded announcement that I needed to insert coins; unless it was a free call. From movies, I gather older pay phones didn't let you make free calls generally, you'd need to insert coins before the dial tone; maybe that was common where you lived too?
As I understand it, the payphone phone lines I interacted were specially configured and had additional signalling so the phone company could determine free or paid at the central office and the payphone would signal payment. Private payphones existed where the phone line was normal and calling rates were determined by the phone itself, but it's trickier to do that right.
It makes some sense that a private payphone that would let you make free calls to the 11X numbers might have a synchronization issue. Dialing 111 wouldn't ever connect anywhere in Italy (I think?), but might have triggered the call is paid behavior, and hanging up quickly may have cancelled actually dialing without the phone realizing. There's a lot of tricky timing with detecting hang ups, and exploiting differences in timing gets you into being a phreaker.
As for who paid, if these were private payphones, probably the owner of the phones. Otherwise, the phone company.
You might enjoy this series of audio recordings: http://www.evan-doorbell.com/production/group1.htm http://www.evan-doorbell.com/production/group1.htm
- comprambler 4y agoNo, there was no dedicated signalling pipeline between the exchange and the payphone. This was widely exploited with the 2600hz noise that the old phreak boxes used to generate and thus have free calling.
- toast0 4y agoSignalling was in band, but still additional --- the exchange didn't play tones down to my house phone to cut the mic until i put in more coins, but they would at the payphone. 2600Hz tone is a bit different, that was used to close one end of a long distance circuit (and then you could play tones to open a new end), but you had to get onto a long distance circuit first. There were, of course, ways to play the coin insert tones.
- oriettaxx 4y ago> "metal holder of the receiver" -> hook switch? You press it down to end the call, usually by "hanging up" the receiver. YES > "the typical sound of a line ready" -> dial tone? YES It was exactly what "docbert" explained above (happening in Australia) > , you'd need to insert coins before the dial tone; maybe that was common where you lived too? YES: without coins we had, if I recall correctly, a long non-stop constant tone, while with the coin it changed into the "you can call now" tone: "to, toooo" > Dialing 111 wouldn't ever connect anywhere in Italy (I think?), you a right > There's a lot of tricky timing with detecting hang ups, and exploiting differences in timing gets you into being a phreaker. ah, I got it > As for who paid, if these were private payphones, probably the owner of the phones. Otherwise, the phone company. yes, all calls from a public phone, but call abroad, so I guess the company "SIP" had to pay for it: not good, I know :( thank you Toast0!