4 ms·
> probably because the PFAS/PFOS risk is only there during manufacture, not usage That's not true. https://en.wikipedia.org/wiki/Polymer_fume_fever https://en.
by ceejayoz 4y ago
> probably because the PFAS/PFOS risk is only there during manufacture, not usage
That's not true. https://en.wikipedia.org/wiki/Polymer_fume_fever https://en.wikipedia.org/wiki/Polymer_fume_fever
- gruez 4y agoMy wording was a bit imprecise, but it should be obvious the thread that we're talking about "PFAS/PFOS ending up in body" risk.
- tristor 4y agoAnd that’s also not true. Cooking with Teflon or other types of non-stick cookware based on these types of chemicals will result in those chemicals contaminating your food. In particular, pre-heating non stick pans is particularly bad, as is the use of the wrong utensils which will cause physically perceptible particles of the material to end up in your food. Any non stick pan comes with a warning you can’t use it in the same house/building as pet birds. Just like canaries in a coal mine, birds are highly susceptible to things which are also dangerous to humans. Just because it doesn’t kill you dead within minutes of turning on the burner does not make it safe.
- gruez 4y ago>And that’s also not true. Cooking with Teflon or other types of non-stick cookware based on these types of chemicals will result in those chemicals contaminating your food. In particular, pre-heating non stick pans is particularly bad, as is the use of the wrong utensils which will cause physically perceptible particles of the material to end up in your food. source? The guidance from the FDA contradicts your claim >Some PFAS are approved for use in the manufacture of non-stick cookware coatings. These coatings are made of molecules that are polymerized (i.e., joined together to form large molecules) and applied to the cookware through a heating process that tightly binds the polymer coating to the cookware. Studies show that this coating contains a negligible amount of PFAS capable of migrating to food. Similarly, the PFAS used in manufacturing of gaskets that come into contact with food do not pose a safety risk because they are also made of molecules that are polymerized. https://www.fda.gov/food/process-contaminants-food/questions-and-answers-pfas-food https://www.fda.gov/food/process-contaminants-food/questions...
- deleted 4y ago[deleted]
- deleted 4y ago[deleted]
- cwkoss 4y agohave you ever seen a non stick pan that someone used metal utensils on? flaked off areas of the non stick coating are apparent.
- gruez 4y agoThe FDA doc isn't explicit on this, but my impression is that the coating itself is polymerized and is therefore inert, unlike the PFAS/PFOA that's in the water supply or whatever.
- sirsinsalot 4y agoThese studies are based on manufacturer guidelines for product use (heat range, material handling), most of which are shown so narrow in scope that in your average kitchen the test environment doesn't exist. Like giving people a drink that can only be stored below 5C or it may become dangerous. Is your fridge exactly always below 5C? Mine isn't.
- ericpauley 4y agoPerhaps the only fine print I've seen on PTFE-coated pans is that they should not be heated above 500F/250C. My understanding is that, under these temperatures, decomposition of the PTFE is not possible.
- sirsinsalot 4y agoYeah but it has been shown in normal cooking these temps are often exceeded. Hence the material being dangerous under normal conditions. Do you cook steak with a thermometer on the pan?
- gruez 4y agoDefine "normal conditions". Searing a steak is arguably "normal", but it's also not something that I'm going to do with a non stick. If I'm stir frying some veggies, or cooking some eggs, I'm probably fine because the oil will start burning before the pan starts emitting fumes.
- sirsinsalot 4y agoNormal as in, anything that may reasonably happen in a consumer kitchen. I'm sure plenty of people sear steak in a non-stick pan.