4 ms·
>The fine print on your frying pan or waterproofing contains legal get outs that are unrealistic. What world are you living in that has "fine print" on pans? T
by gruez 4y ago
>The fine print on your frying pan or waterproofing contains legal get outs that are unrealistic.
What world are you living in that has "fine print" on pans? The pans I bought recently certainly doesn't have them, probably because the PFAS/PFOS risk is only there during manufacture, not usage.
- ceejayoz 4y ago> probably because the PFAS/PFOS risk is only there during manufacture, not usage That's not true. https://en.wikipedia.org/wiki/Polymer_fume_fever https://en.wikipedia.org/wiki/Polymer_fume_fever
- gruez 4y agoMy wording was a bit imprecise, but it should be obvious the thread that we're talking about "PFAS/PFOS ending up in body" risk.
- tristor 4y agoAnd that’s also not true. Cooking with Teflon or other types of non-stick cookware based on these types of chemicals will result in those chemicals contaminating your food. In particular, pre-heating non stick pans is particularly bad, as is the use of the wrong utensils which will cause physically perceptible particles of the material to end up in your food. Any non stick pan comes with a warning you can’t use it in the same house/building as pet birds. Just like canaries in a coal mine, birds are highly susceptible to things which are also dangerous to humans. Just because it doesn’t kill you dead within minutes of turning on the burner does not make it safe.
- gruez 4y ago>And that’s also not true. Cooking with Teflon or other types of non-stick cookware based on these types of chemicals will result in those chemicals contaminating your food. In particular, pre-heating non stick pans is particularly bad, as is the use of the wrong utensils which will cause physically perceptible particles of the material to end up in your food. source? The guidance from the FDA contradicts your claim >Some PFAS are approved for use in the manufacture of non-stick cookware coatings. These coatings are made of molecules that are polymerized (i.e., joined together to form large molecules) and applied to the cookware through a heating process that tightly binds the polymer coating to the cookware. Studies show that this coating contains a negligible amount of PFAS capable of migrating to food. Similarly, the PFAS used in manufacturing of gaskets that come into contact with food do not pose a safety risk because they are also made of molecules that are polymerized. https://www.fda.gov/food/process-contaminants-food/questions-and-answers-pfas-food https://www.fda.gov/food/process-contaminants-food/questions...
- deleted 4y ago[deleted]
- deleted 4y ago[deleted]
- cwkoss 4y agohave you ever seen a non stick pan that someone used metal utensils on? flaked off areas of the non stick coating are apparent.
- gruez 4y agoThe FDA doc isn't explicit on this, but my impression is that the coating itself is polymerized and is therefore inert, unlike the PFAS/PFOA that's in the water supply or whatever.
- sirsinsalot 4y agoThese studies are based on manufacturer guidelines for product use (heat range, material handling), most of which are shown so narrow in scope that in your average kitchen the test environment doesn't exist. Like giving people a drink that can only be stored below 5C or it may become dangerous. Is your fridge exactly always below 5C? Mine isn't.
- ericpauley 4y agoPerhaps the only fine print I've seen on PTFE-coated pans is that they should not be heated above 500F/250C. My understanding is that, under these temperatures, decomposition of the PTFE is not possible.
- sirsinsalot 4y agoYeah but it has been shown in normal cooking these temps are often exceeded. Hence the material being dangerous under normal conditions. Do you cook steak with a thermometer on the pan?
- gruez 4y agoDefine "normal conditions". Searing a steak is arguably "normal", but it's also not something that I'm going to do with a non stick. If I'm stir frying some veggies, or cooking some eggs, I'm probably fine because the oil will start burning before the pan starts emitting fumes.
- sirsinsalot 4y agoNormal as in, anything that may reasonably happen in a consumer kitchen. I'm sure plenty of people sear steak in a non-stick pan.
- sirsinsalot 4y agoYou're not paying enough attention. The last pan I bought that had PFAS-based non-stick coating stated: (a) do not heat above 220C (b) do not use metal utensils This isn't because they think these things won't happen (they know they will, and you do too). And it isn't because they want to ensure the longevity of your pan (the opposite is true). It's because they can say that the pan was used incorrectly, as highlighted by FDA testing parameters, and therefore liability for any ingesting of hazardous material is the user's problem.
- mensetmanusman 4y agoIf you scratch the pan, you are generating micro particles of PFAS that eventually turn into the stuff some people are worried about. Now, on the scale of things, probably the obesity epidemic due to sedentary life styles, sugar, etc. is 10-100x more of a societal health issue, but it’s harder to blame someone else for that.
- gruez 4y ago> If you scratch the pan, you are generating micro particles of PFAS that eventually turn into the stuff some people are worried about. Are they the same thing though? The "PFAS contaminated water" are from chemical plants or firefighting foam. That's not exactly the same thing as the polymerized coatings that's on pans. They're all vaguely PFAS adjacent, but people seem to be lumping the fumes (from burning their pans), the coating itself, and the precursor chemicals as if it's one thing, which probably isn't correct. paraffin, gasoline, and plastic are all petroleum adjacent, but they're all vastly different chemicals with different safety profiles. They all might be bad for you, but for different reasons. Just because plastic might be leeching chemicals that give you breast cancer, doesn't mean that you're going to get breast cancer from touching candles.
- mensetmanusman 4y ago“They're all vaguely PFAS adjacent, but people seem to be lumping the fumes (from burning their pans), the coating itself, and the precursor chemicals as if it's one thing, which probably isn't correct.” This is true, PFOS is not the same as PFAS, but the media already is fear mongering enough that politicians and juries are thinking it’s all the same. This is probably analogous to what happened with nuclear science, where the risks were worth it but we opted for more dangerous technology because of fear.