4 ms·

Quick, how many inches are in a yard?

by irdc 4y ago

bliteben 4y ago
How many seconds are in a minute? How many hours are in a day?
- dontlaugh 4y ago
  Minutes and hours are not SI.
satiric 4y ago
As an American, the only time I use yards is with football fields. When am I going to use inches in that context? It's not a simple conversion because it's not a common conversion. It's like converting between inches and meters. The imperial system is multiple systems smashed together, and it's optimized for the more common conversions. Not saying it's a perfect system, or that metric isn't better, but it's absolutely useable. I'd much rather stick with imperial than half-ass a conversion to metric and be stuck between the two systems, like what's happened in Canada and the UK.
Fatnino 4y ago
Quick, how many mm in a dm?
- abricot 4y ago
  100 mm
  - Fatnino 4y ago
    I too have 36 inches to a yard available at a moments notice. Also 39 to a meter.
- defrost 4y ago
  Trivial, but . . . who actually seriously uses decimeter on a weekly basis and what for? I've used metric for 50+ years and I'm in the field of sensors and measurement with application from remote sensing to minerals and energy .. and I've yet to use a decimeter unit (outside of a programming exercise). The convential usage is pico, nano, milli, centi, and full metre (and upwards to kilo, etc).
  - Fatnino 4y ago
    I know. But it's also a little weird because a foot is a very human size but metric in common usage just skips over that size range.
    - defrost 4y ago
      A metre is very human sized also .. you can easily hold your hands a metre apart (it's ~3.3 feet (~3.28 if being picky)), about the same as a yard. I mean, who uses feet anymore anyway? I've just measured up a whole bunch of stuff making a parrot proof covering for a pear tree .. everything is jotted on the back side of a bit of board in mm (millimeters). 3230 mm is 3.2 metres and a bit .. a bit under 10 & a half feet (but, again, who even uses feet or thinks in them anyway? *) * We do use yards for conveying to USAians what distance we shoot targets at on the farm; (eg from the next door neighbours youtube channel [1] 5023 yards 24" x 24" target ULR shooting) [1] https://www.youtube.com/watch?v=7owwTz7Z0OE https://www.youtube.com/watch?v=7owwTz7Z0OE
      - Fatnino 4y ago
        Look, I'm pro doing things in metric. I think the US should get in line with the rest of the planet. But doing things at yard scale in mm is not helping the cause. Who wants to be throwing around 4 digit numbers in their head?
        defrost 4y ago
        Carpenters, woodworkers, metalworkers, electricians, etc. who work at a 10 to 50 foot (for the central north americans that like that kind of retrograde unit) scale AND who want a good fit ... Millimeter fit on cabinets is the fit you want, whether you work in metric, British Imperial, or US Common. When you have a long kitchen counter you're looking at 3 metres or more ( ~10 ft ) with framing and doors that join with barely the width a fingernail between. The measurements are 10 foot (two digits), 6 inches, (another digit) and then a bit (tenths or hundredths of an inch, or a fraction - depending which you prefer). That's ~ 4 digits for each measurement on a common household task. It's pretty simple doing this as 3245mm on paper .. tradies have been doing this here since the 1970s and nothing's fallen down yet. Dunno about you, I'm primarily a mathematican doing applied work - but I've worked as a TA (trades assistent) in electrical, gas fitting, plumbing, heavy mechanical, rigging (multi sling heavy lifting), welding, etc. (too much exposure to minesites and cattle stations I guess) and there's an entire class of people that are comfortable working with measurements that span the length of a truck and are accurate to the millimetre (or tenth of an inch) - so, four digits? No worries. Why do you struggle with that?

Quick, how many inches are in a yard?

by irdc 4y ago

Quick, how many inches are in a yard?

bliteben 4y ago

How many seconds are in a minute? How many hours are in a day?

dontlaugh 4y ago
Minutes and hours are not SI.

satiric 4y ago

As an American, the only time I use yards is with football fields. When am I going to use inches in that context? It's not a simple conversion because it's not a common conversion. It's like converting between inches and meters. The imperial system is multiple systems smashed together, and it's optimized for the more common conversions. Not saying it's a perfect system, or that metric isn't better, but it's absolutely useable. I'd much rather stick with imperial than half-ass a conversion to metric and be stuck between the two systems, like what's happened in Canada and the UK.

Fatnino 4y ago

Quick, how many mm in a dm?

abricot 4y ago
100 mm
- Fatnino 4y ago
  I too have 36 inches to a yard available at a moments notice. Also 39 to a meter.
defrost 4y ago
Trivial, but . . . who actually seriously uses decimeter on a weekly basis and what for? I've used metric for 50+ years and I'm in the field of sensors and measurement with application from remote sensing to minerals and energy .. and I've yet to use a decimeter unit (outside of a programming exercise). The convential usage is pico, nano, milli, centi, and full metre (and upwards to kilo, etc).
- Fatnino 4y ago
  I know. But it's also a little weird because a foot is a very human size but metric in common usage just skips over that size range.
  - defrost 4y ago
    A metre is very human sized also .. you can easily hold your hands a metre apart (it's ~3.3 feet (~3.28 if being picky)), about the same as a yard. I mean, who uses feet anymore anyway? I've just measured up a whole bunch of stuff making a parrot proof covering for a pear tree .. everything is jotted on the back side of a bit of board in mm (millimeters). 3230 mm is 3.2 metres and a bit .. a bit under 10 & a half feet (but, again, who even uses feet or thinks in them anyway? *) * We do use yards for conveying to USAians what distance we shoot targets at on the farm; (eg from the next door neighbours youtube channel [1] 5023 yards 24" x 24" target ULR shooting) [1] https://www.youtube.com/watch?v=7owwTz7Z0OE https://www.youtube.com/watch?v=7owwTz7Z0OE
    - Fatnino 4y ago
      Look, I'm pro doing things in metric. I think the US should get in line with the rest of the planet. But doing things at yard scale in mm is not helping the cause. Who wants to be throwing around 4 digit numbers in their head?
      - defrost 4y ago
        Carpenters, woodworkers, metalworkers, electricians, etc. who work at a 10 to 50 foot (for the central north americans that like that kind of retrograde unit) scale AND who want a good fit ... Millimeter fit on cabinets is the fit you want, whether you work in metric, British Imperial, or US Common. When you have a long kitchen counter you're looking at 3 metres or more ( ~10 ft ) with framing and doors that join with barely the width a fingernail between. The measurements are 10 foot (two digits), 6 inches, (another digit) and then a bit (tenths or hundredths of an inch, or a fraction - depending which you prefer). That's ~ 4 digits for each measurement on a common household task. It's pretty simple doing this as 3245mm on paper .. tradies have been doing this here since the 1970s and nothing's fallen down yet. Dunno about you, I'm primarily a mathematican doing applied work - but I've worked as a TA (trades assistent) in electrical, gas fitting, plumbing, heavy mechanical, rigging (multi sling heavy lifting), welding, etc. (too much exposure to minesites and cattle stations I guess) and there's an entire class of people that are comfortable working with measurements that span the length of a truck and are accurate to the millimetre (or tenth of an inch) - so, four digits? No worries. Why do you struggle with that?