3 ms·
I'm surprised that with all that automation, they're still manually colouring them. That would be something ideally suited to CNC.
by userbinator 4y ago
I'm surprised that with all that automation, they're still manually colouring them. That would be something ideally suited to CNC.
- hcrisp 4y agoLooks like they are using an Andromat manipulator [0] to handle the hot forged castings. Operates via skilled manual controls not automation, I believe. [0] https://www.andromatusa.com/klocke/manipulatoren/ https://www.andromatusa.com/klocke/manipulatoren/
- geenew 4y agoI thought the same thing. A couple of things that might account for that - From other shots in the video later in the process, it looks like the majority of the manholes produced don't have colouring applied -- The volume of manholes requiring colouring might be too low to justify the expense of automation - Automated control of a fluid with high viscosity and a tendency to dry/accumulate would be much more difficult than, say, the grinding operation shown earlier. At the very least, the nozzles would require more maintenance I fully agree though, that it is quite interesting that that step is being done manually. I find most videos of this kind to have the same type of surprise - steps which, to a layman, at least, appear like they could be automated, but are not, despite other steps in the process being automated. I imagine a manufacturing engineer's curse is being able to see a perfectible process but not being able to justify the expense.
- swader999 4y agoColoring is the fun part. Probably a perk for employees.
- 0cf8612b2e1e 4y agoI noticed one of the workers was consulting a color map on how to paint it. Maybe there are a significant number of different designs where it is easier to have a flexible human than bother with programming robots.
- fastball 4y agoYou'd only need to program it once.
- ThrowawayTestr 4y agoWhy spend 20 minutes doing something manually when you can spend 20 hours automating it.
- fastball 4y agoBecause when you do that thing 3000 times it becomes 1000 hours? Versus a CNC which could probably do the paint job in 2 minutes, resulting in a total time of 120 hours.
- ThrowawayTestr 4y agoI think you're underestimating the time it takes to make a robot that can perfectly squeeze out paint onto an arbitrary design.
- fastball 4y agoPainting robots definitely already exist and don't need to be developed from scratch.