3 ms·
1/2 the volume, which is 40% smaller diameter (Assuming the length is kept, which as a drop-in replacement it would have to be?) The inventor talks about how t
by hinkley 4y ago
1/2 the volume, which is 40% smaller diameter (Assuming the length is kept, which as a drop-in replacement it would have to be?)
The inventor talks about how the internal structure is based on minimizing surface area. That would of course reduce the material but in a heat exchanger don't you want to maximize surface area, not minimize it? Especially if your heat exchanger has a higher thermal transfer rate than the fluids. It makes me wonder if there's an answer to this design that's another 20% smaller.
- fnordpiglet 4y agoYeah I did this about 3 years back using thermally conducting filament, the goal is exactly that - maximize surface area while maximizing float through the manifold. It’s actually stupidly easy to do these days with cura. Make your heat sink shape, say a cube, and slice it with zero wall thickness and gyroid infill. Then attach to a copper plate, and add a fan to the top. The problem is materials. Most people don’t have the ability to print in copper or aluminum. The thermally conducive filaments are absurdly expensive (like $120/kg) and the conductivity isn’t that great, so you can generally do better with a fin based thing in copper or aluminum. I think it would be possible to make a filament with aligned graphene in the filament that does really well, but I’m not that hard core. Another idea I have is building these out of graphene aligned in a super critical bath of silver. But that requires some serious equipment for the pressures and temperatures.
- zmgsabst 4y agoFor some geometries, you can also 3D print plastic and then cast in sand. That won’t get you the full power of 3D printing, but you can get many geometries you couldn’t otherwise.
- fnordpiglet 4y agoYeah I’ve thought of doing this. I probably will at some point. A gyroid should be castable
- ZeroGravitas 4y agoI believe 'minimal surface' is a technical term for these types of shapes: https://en.wikipedia.org/wiki/Minimal_surface https://en.wikipedia.org/wiki/Minimal_surface
- phkahler 4y ago>> The inventor talks about how the internal structure is based on minimizing surface area. That gives something like maximal strength for the amount of material. I suspect that's kind of related to reducing resistance to flow for a given atea, or something like that. They can increase surface area by shinking the gyroid pattern. But yeah, I thought the same thing when he said that - dude you want the maximum surface area!