4 ms·
In your experiments with spray polyurethane foam, did you use open or closed-cell foam? I ask because you said that in your experiments it didn't insulate that
by malandrew 15y ago
In your experiments with spray polyurethane foam, did you use open or closed-cell foam? I ask because you said that in your experiments it didn't insulate that well. AFAIK, open cell foam has a lower R-value than standard Styrofoam polystyrene (~3.5 vs. ~5.0). Closed-cell polyurethane foam on the other hand has an R-value of about ~6.5. The problem with closed cell foam is the weight (2.0 per cubic foot vs. 0.5 for open-cell.
Even if it were too messy to use for the outer construction, it might be interesting to use it only for those components that are most temperature sensitive, such as the battery. This would also solve the battery dislodging problems you had with your first flight.
I'm wondering if anyone is creating a stereolithography machine capable of printing structures using materials designed for insulation such as polyurethane/polystyrene foams and silica aerogels (R-value ~10.0.
I'm also curious if using stereolithography to print honeycomb structures in a vacuum would be a good way to produce vacuum insulated structures (AFAIK R-values of 30 to 50 should be possible.)