3 ms·
It is the additives in the plastics (to make them softer, or color them, or whatever) that are terrible for you. That said, one-time-use plastics are absolutel
by userbinator 4y ago
It is the additives in the plastics (to make them softer, or color them, or whatever) that are terrible for you.
That said, one-time-use plastics are absolutely obscene and need to be removed from society as soon as humanly possible.
Those seem to be somewhat conflicting viewpoints. The overwhelming majority of single-use plastics are PE or PP, which also don't really have much in the way of additives.
PVC, ABS, and others in those families are what need the really harmful plasticisers, and also cost a lot more; as a result, they aren't going to be chosen for single-use applications unless there are other important reasons to do so.
Then the article goes on to mention PFAS, which is related to fluoropolymers, another very different category. I'm sure FPs are used in some single-use applications, but they are not cheap compared to PP or PE so they'll be massively lower in volume.
I hate how articles like this just promote a "plastics = bad" narrative, and they didn't even mention what type of microplastic they found.
- Rebelgecko 4y agoI have dental floss and tape made out of PFAS. Unfortunately its 25% PFAS content is what makes Oral B floss so good and waxy- I haven't found a non-PFAS floss that works half as well
- user68858788 4y agoMy dental hygienist warned that Oral B isn’t effective and recommended I use a woven floss, like cocofloss. Stay safe out there.
- blahblah1234567 4y agoGoogled: list of additives in PE plastic Found: "Stabilizers are the most widely used additives in the PE industry. Other additives commonly added to polyethylene are stearates (e.g., calcium and zinc stearates to neutralize acidic catalyst residues and to impart lubricity), pigments (e.g., carbon black, cadmium yellow, and titanium dioxide), metal deactivators (e.g., oxalyl bishydrazide for PE cable insulation), processing aids (e.g., Dynamar, Ucarsil, Viton-A, to improve flow of the molten polymer), optical brightners (e.g., Uvitex OB to enhance appearance). Additives commonly added to polyethylene include antioxidants (hindered phenolics and phosphites for process stabilization), antiblock compounds (e.g., silica, talc, and kaolin to reduce sticking of adjacent film layers), and slip agents (e.g., erucamide and oleamide to reduce friction)." "POLYETHYLENE (Stabilization and Compounding)" https://www.linkedin.com/pulse/polyethylene-stabilization-compounding-ahmed-eltayef/ https://www.linkedin.com/pulse/polyethylene-stabilization-co...