3 ms·
Or 4 parallel runways like Detroit Metro (KDTW): 4R, 4L, 3R, and 3L. https://aeronav.faa.gov/d-tpp/2213/00119AD.PDF https://aeronav.faa.gov/d-tpp/2213/00119AD.
by sokoloff 4y ago
Or 4 parallel runways like Detroit Metro (KDTW): 4R, 4L, 3R, and 3L.
https://aeronav.faa.gov/d-tpp/2213/00119AD.PDF https://aeronav.faa.gov/d-tpp/2213/00119AD.PDF
- asciimike 4y agoKDEN also has four parallels (16-34L/R and 17-35L/R). All are 172.6º or 352.6º.
- stevehawk 4y agoKDEN also put their runways so close together that it's not uncommon to for aircraft on approach on the parallel to set off another airplane's TCAS. I think most airline pilots consider that airport ripe for a midair.
- Mountain_Skies 4y agoAtlanta has five parallel runways: 27R, 27L, 9R, 9L, and 28/10. It appears the main four that are close to each other are set alternating east landing and west landing as they're not marked on both ends like 28/10 is.
- sokoloff 4y agoThey are numbered on both ends on both the satellite view (real-world) and on the FAA diagram: http://aeronav.faa.gov/d-tpp/2213/00026AD.PDF http://aeronav.faa.gov/d-tpp/2213/00026AD.PDF There would be no (or extremely rare, at a minimum) operational reason to alternate directions for takeoff and landings on parallel runways. (There are rules for simultaneous operations to parallel runways and having them be in opposite directions would be problematic as you have to assume some aircraft will execute a missed approach and would then be climbing into opposite direction landing traffic with only a small lateral offset.)
- TylerE 4y agoAbout the closest I can think of to that is some mountain airports that do all takeoffs one way and all landings the other. I’m not aware of any of those with more than one runway and traffic is usually extremely limited.
- addaon 4y ago27L and 9R are the same runway, always. 27R and 9L are the same runway. In Atlanta, besides 27L/9R and 27R/9L, there's also 26L/8R and 26R/8L, as well as the 28/10 you mention. See https://aeronav.faa.gov/d-tpp/2213/00026AD.PDF https://aeronav.faa.gov/d-tpp/2213/00026AD.PDF
- pdonis 4y agoThis is the same dodge that ORD uses, as DocTomoe pointed out: pretending some of the runways are a different heading when they're actually not. I'm not sure how that can be avoided with four runways, though, since I don't see how to fit a fourth option in with "L", "C", and "R". In fact, taking this dodge into account, the DFW example I gave actually has five parallel runways; the two they label 18/36 are actually the same heading as the three they label 17/35. I wonder if they'll ever need to go to six and add an 18/36C.
- pishpash 4y agoWhat's L C R and why can't there be more letters?
- TylerE 4y agoCould just go A B C D E left to right I guess. If only 3 use B C D so the middle is always C regardless of system.
- sokoloff 4y agoYou want to have a consistent designation for opposite direction runways. (9R is always the same piece of pavement as 27L) Doing that for 4 would need one direction to be A B C D and the other to be B C D E (which is workable, but doesn't seem particularly more elegant than just using left, right, and center [and in fact is worse in some ways, since from one direction, B is the left-most and from the other, it's A])