3 ms·

Thanks, that's useful! That was my thought w.r.t. startup current, since I assume it is an inductive load. The model is a Carrier 58STA090-14 and it is indeed 1

by jchw 4y ago

Thanks, that's useful! That was my thought w.r.t. startup current, since I assume it is an inductive load. The model is a Carrier 58STA090-14 and it is indeed 1/3 HP. Seems likely I could run that load off my car in a pinch, which is definitely a good option to have available.

mikeyouse 4y ago
So per the spec sheet -- the "Full Load Amps" for that model could actually be up to 5.2A per the bottom portion of the 90-14 column second from the right on page 5: https://d1049ui2fjityy.cloudfront.net/userfiles/inriver/documents/dp/31/-t/product%20data%20-%2058st-13pd.pdf https://d1049ui2fjityy.cloudfront.net/userfiles/inriver/docu... That motor has a switch so it could be in 3 different settings -- As shipped, the blower motor speed is set to be faster for AC (more draw in the summer) to prevent the coils from icing over, and then it's shipped to be the slowest fan speed while in heating mode, but it is possible that your installer changed that. If indeed it is in the "slow" speed for heat, then 2.5A would be about right.
- bombcar 4y ago
  Also anyone with a high efficiency furnace should be away there is a second smaller blower on the exhaust.