6 ms·
What you need to know about Wi-Fi 6 (IEEE 802.11ax)
- Scene_Cast2 4y agoThere's also WiFi 6E and WiFi 7, which introduce the 6GHz bands for more congestion-free spectrum. Btw, if anyone is looking for a solution to congestion without going to 6GHz, I found great performance on the 5GHz DFS bands (with my fully DFS-compliant access point).
- mjevans 4y agoStability of connection might be a more preferable metric, particularly in noisy urban environments. A theory I agree with for that is to choose the non DFS band(s) (depending on desired channel width and included device compatibility) to prevent the network from hopping around at the cost of slowing down when the noise floor (other broadcasters) increase.
- doublepg23 4y agoIs there a way to determine how often a DFS band will be interrupted in your area?
- wkat4242 4y agoYes. Testing it. :) How else would you find out? It depends on so many factors. Nearby radars, placement inside the home, sensitivity etc. The only thing you can do in advance is check for radar transmitters in the 5-6Ghz range nearby. Be aware that these are usually in a pretty specific frequency, affecting only a few channels.
- azinman2 4y agoHow do you check for it? I have UniFi equipment- is there something built in that can monitor it for me? How long a test do you need? Can/will it change over time?
- vel0city 4y agoIf you're using a DFS frequency and the device notices it needs to change frequency because a primary user transmits the Unifi console will log DFS events in the notification area. It won't emit any notifications if you're not using a DFS channel.
- PaulKeeble 4y agoWifi 7 is going to be the more useful jump for most on Wifi 5 still I think. https://en.wikipedia.org/wiki/IEEE_802.11be https://en.wikipedia.org/wiki/IEEE_802.11be The 6Gghz from Wifi 6E will be included but critically Wifi 7 devices can use difference frequencies at the same time alongside the 320Mhz channel widths and 4096 QAM. It will be a bigger jump than Wifi 6 and 6E and might finally start to see genuinely greater than 1gbps performance in practice.
- geerlingguy 4y ago6E can already deliver 1.5 Gbps or so per device with good signal at 160 MHz channel width. But most AP manufacturers have optimized for client density rather than raw single client performance.
- phkahler 4y agoMost APs don't have an upstream connection faster than that anyway. Clients generally don't need that speed anyway, and if they do its only for a few seconds anyway (large file transfer).
- nixgeek 4y agoMost APs aimed at domestic situations are still on 1Gbps, but WiFi 6-series (not 6E/7) APs aimed at business/enterprise environments have had 2x5Gbps uplinks for years now - since September 2018, i.e. Aruba AP-555’s [1]. I happen to use these at home and they’re great with 100’s of concurrently connected clients (across 5+ APs and 15+ radios, usually ~70 clients per radio max) vs. Ubiquiti/Eero which always had lots of issues. Obviously though, YMMV! Definitely agree that it’s generally not needed (>1Gbps) but game updates these days run 100GiB+ in some cases (particularly for AAA titles) and it’s nice to have a little more speed sometimes. Individual clients are usually 80MHz 2x2 so best case will get ~1.2Gbps [2], but the radio can handle a couple clients doing things at once (MU-MIMO). For external connectivity, Comcast is now selling 1.2Gbps services in many US markets (they also overprovision the profile so speedtest.net will often see 1.4Gbps), and consequently cable modems have had 2.5GE ports for a couple years now. When combined with APs that have >1Gbps uplinks this can actually get used! Some markers can now get Comcast with 2000/200 (down/up) [3], which is a huge improvement over 1200/35 — the previous maximum. So, it’s nice to have APs with more uplink, and it’s nice to have >1Gbps Comcast, but I’d definitely not call it mainstream yet. [1] https://www.arubanetworks.com/assets/ds/DS_AP550Series.pdf https://www.arubanetworks.com/assets/ds/DS_AP550Series.pdf [2] https://mcsindex.com/ https://mcsindex.com/ [3] https://corporate.comcast.com/press/releases/comcast-increasing-internet-speeds-and-launches-new-2-gig-speed-across-northeast https://corporate.comcast.com/press/releases/comcast-increas...
- deleted 4y ago[deleted]
- throw0101c 4y agoIf anyone wants to get into some of the weeds of Wifi, the Wireless LAN Professionals organization has a good Youtube channel where they put the presentations from their biannual conferences up: * https://www.youtube.com/@WirelessLANProfessionals/videos https://www.youtube.com/@WirelessLANProfessionals/videos
- chazeon 4y agoSee also a more comprehensive comparison between different generations: Understand Wi-Fi 4/5/6/6E/7 (802.11 n/ac/ax/be) [1] [1]: https://www.duckware.com/tech/wifi-in-the-us.html https://www.duckware.com/tech/wifi-in-the-us.html
- Havoc 4y agoNow if only the mainstream providers would stick 2.5 gbe onto the damn things. If I see another box advertising 4000mbps wifi speeds with 1gbe ports I’ll lose it
- fortysixdegrees 4y agoSomething about the honesty in the way this is written I love. I am a fan now of their gear even without reading any reviews. I just tried to buy one of their APs but looks like they arent available in my country.
- walterbell 4y agoHad not heard of this German router vendor before this article. Looks like Amazon.de will ship their routers to US. Their OpenWRT build SDK is public, https://github.com/keenetic/keenetic-sdk https://github.com/keenetic/keenetic-sdk. Good sales pitch, if they live up to their claims of long-term updates, https://keenetic.com/en/company/about https://keenetic.com/en/company/about > Since 2010 several dozen models have been launched, and the number of users of our brand has exceeded seven million. Keenetic understands that business is done between people and that it is as important to listen as to preach, so Keenetic has built complex customer and distributor support infrastructures that allow prompt complaint resolution and clear product development guidance. A great selling point of our offerings is their continuous suitability for current market customer needs and the modular architecture that allows Keenetic products to grow with the clients’ needs.
- LinAGKar 4y ago802.11n supports the 5 GHz band, contrary to what the fifth paragraph says