8 ms·
100G-LR4 optic cable teardown
- s3000 4y ago>pretty much everything else is voltage regulation for taking the 3.3V from the switch and regulating it down to lower voltages to drive the lasers Why doesn't the switch deliver the voltages directly that are needed for the lasers?
- fuzzy2 4y agoBecause the interface this module plugs into is not specific to optic data transmission. Also, remember how LEDs and lasers want constant current. A regulator circuit would be required anyway.
- the_third_wave 4y ago
- Slighted 4y agoMastodon is a great example of pathetic web design. More than a few times has it completely failed to work for me at all just as in your case. Every single instance I've used has presented me with the same warning: "To use the Mastodon web application, please enable JavaScript" as I have JS disabled by default. Please, PLEASE tell my why I can't see anything on the page without Javascript. What amazing cutting-edge Twitter-busting follower-thrusting technologies could Mastodon possibly be using that it needs me to turn on JS to see absolutely anything?
- rsolva 4y agoMastodon uses the open protocol ActivityPub, which means you can access posts like these from many other clients than the servers web interface. If you dislike JavaScript, may I suggest 'Brutaldon' [0]? There is also the cli/tui client 'toot' [1], if you prefer to live in the terminal. Using a client to access posts in the fediverse network do require that you have an account somewhere in the fediverse, though. [0]: https://gitlab.com/brutaldon/brutaldon#brutaldon https://gitlab.com/brutaldon/brutaldon#brutaldon [1]: https://toot.readthedocs.io/ https://toot.readthedocs.io/
- the_third_wave 4y agoCan the downvoter please explain the vote of non-confidence? It does make it hard to read what is written when the server denies access after all, something which I think to be quite relevant in this context.
- somehnguy 4y agoI also received a rate limit warning, but the ‘try again’ time was only 1 minute later. So, I refreshed 1 minute later and it loaded fine. I really appreciated that it made it clear when I should try again. The content sounded interesting so waiting a minute wasn’t a big deal.
- adql 4y agoI don't understand how it is "rate limiting" when I was first viewer from IP, and most likely from entire IP class (it's 6AM here in office and there is nobody here, and I'm the admin of the infrastructure so I'm pretty sure literally nobody else accessed it) Also displaying "rate limited" in some retarded popup that instantly disappears while page reads "404 not found" is some top tier level of UX idiocy, I didn't even notice because I usually open both HN post and page so it just... displayed in the background when I wasn't looking and only refresh of the page showed it... So I waited a minute, refreshed, then the site told me to wait 5 more minutes... Tried on mobile (via 4g to get different IP) and it is just "not found", not even a popup I'm imagining this idiotic attempt at throttling is direct effect of Mastodon being just so fucking slow and someone trying to patch it via more bad design
- berbec 4y agoA facinating teardown! I wonder how long it will be before we manage to get 100G over reasonable copper length. https://en.wikipedia.org/wiki/100_Gigabit_Ethernet https://en.wikipedia.org/wiki/100_Gigabit_Ethernet says we can have 100GBASE-CR4 for 7m but no Cat8 yet.
- wmf 4y agoThat would probably be more expensive than fiber. It's time to move on from CatN cabling.
- walrus01 4y agoTwo strand singlemode already costs far less per meter than ordinary cat6 utp nevermind cat6a or shielded stuff. Copper isn't cheap.
- teaearlgraycold 4y agoMaybe my future house should be wired for fiber...
- vermilingua 4y agoSee https://news.ycombinator.com/item?id=33393540 https://news.ycombinator.com/item?id=33393540
- walrus01 4y agoone of the challenges there is that you can't do PoE over fiber, so for common house use with things like security cameras and 802.11ac/ax access points, you still want copper.
- DannyBee 4y agoit also has a better bend radius by far now. (cat6a is about 1 inch, g.657a3/b3 is <0.25 inches)
- sebazzz 4y ago
- GekkePrutser 4y agoI'm surprised they use flip chip tech in something this expensive. Flip chips tend to be sensitive to light and this is after all a laser module. Raspberry pi had lots of issues with photosensitivity in its flip chip wifi controller. Use flash nearby and it would reset. If it were me I'd just spend the 10c for the plastic.. Also really surprised the laser colors are only 4.5nm apart! The size is amazing by the way.. I worked with fiber tech in the late 90s and a 16-colour DWDM multiplexer was the size of a full rack!
- mmastrac 4y agoPerhaps it's a heat thing, plus the flip chips are in a separate space from the lasers.
- adql 4y agoI'd guess it's wanting for laser frequency to not shift with temperature
- pantalaimon 4y agoThe STM32 is not responsible for generating the laser frequency and will not produce much heat on it's own
- justsomehnguy 4y ago> Flip chips tend to be sensitive to light and this is after all a laser module If a laser shines through to the chip then your SFP is dead already. SFP module has a metal case, SFP socket has a metal casing and usually surrounded in more metal around, be it a switch or a server.
- aidenn0 4y ago> Also really surprised the laser colors are only 4.5nm apart! Sounds tiny when you are talking about wavelengths, but convert to frequency and it's 3THz in near-IR.
- gregschlom 4y ago"so there's a peltier cooler underneath the platform holding the lasers and first optical stage so that the optic can electrically heat or cool the lasers to keep them at the right temperature! " I get that Peltier coolers are simple, solid state devices, but still. Between that and the prisms and lenses, the amount of complexity here is mind blowing.
- focusedone 4y agoI'd expect that sentence to come from a hard sci-fi novel about weapons on an orbital platform or something. Instead, it's a pinky-sized bit of tech working to send cat videos to our phones. Amazing!
- adql 4y ago
- blahyawnblah 4y agoSame here. Is this some feature of Mastodon?
- adql 4y agoI smell some anti-herd "feature" where user instance never saw gets mandatory timeout to avoid site being fucked every time something on it gets popular. ... except whoever wrote it fucked up.
- hutzlibu 4y agoAt first it just said "site not found" and then it reloaded normal for me on firefox mobile (on android). Once it reloaded, I found it nicer to read, than a Twitter thread, but if I want to publish something, I would not find that tolerable. Not loading is a clear signal it might work later, but showing a "content does not exist" tells me as a user to go somewhere else.
- adql 4y ago> Once it reloaded, I found it nicer to read, than a Twitter thread, but if I want to publish something, I would not find that tolerable. This is perfect example of "it should've been just a blog post". Kinda shame Mastodon repeats same Twitter failures, instead of just giving an option for long format content. I mean, it is nicer than Twitter formatting-wise but that's a low bar
- codebolt 4y agoSomewhat ironic that an article about high-performance networking is down.
- jonatron 4y agohttps://archive.vn/7k5c0 https://archive.vn/7k5c0 https://web.archive.org/web/20221212104843/https://social.afront.org/@kwf/109492743645650432 https://web.archive.org/web/20221212104843/https://social.af...
- Doxin 4y agoAm I reading right that there's a direct interaction between magnetism and optical polarization? I know that light polarization is a pretty wacky topic to start with, but having magnets in the mix makes it seem unlikely amounts of wacky to me! Anyone got any reading on the topic?
- extropy 4y agoThat sounds very wrong. Not a physicist, but light does not interact with magnets, or you need to get into the superconducting strength levels before it does. https://en.m.wikipedia.org/wiki/Optical_rotation https://en.m.wikipedia.org/wiki/Optical_rotation It seems the optical rotation happens due to molecular structure of specific materials. Edit, found this: https://en.wikipedia.org/wiki/Faraday_effect https://en.wikipedia.org/wiki/Faraday_effect So a specific material plus magnetic field is needed. But still not sure how strong of a field is sufficient.
- tomn 4y agoFor more details on this specific application these pages might be more relevant: https://en.wikipedia.org/wiki/Optical_isolator https://en.wikipedia.org/wiki/Optical_isolator https://en.wikipedia.org/wiki/Faraday_rotator https://en.wikipedia.org/wiki/Faraday_rotator
- ycui1986 4y agoMagnet there is probably used as an isolator. The laser can only go out,but not come back.( yes, there will be laser coming back from reflection, which also interrupt the operation of the source laser.
- matthberg 4y agoYep, the Faraday Effect! The sibling comment has a link to the Wikipedia page, yet for a quick video explanation and demonstration Applied Science's video on the Faraday Effect was fantastic. It demonstrates it, explains some use cases, and also goes into how the material the light is passing through affects the strength of the magnetic induced rotation. https://www.youtube.com/watch?v=XhU-nNiAgtI https://www.youtube.com/watch?v=XhU-nNiAgtI
- DesiLurker 4y agoGreat stuff, I am also happy that people are sharing it using mastodon hosted sites. great way to cultivate focused communities.
- rand49an 4y agoI'd love to see the same for a CSR4 module, those are very weird.
- gertrunde 4y agoSince CSR4 uses a MTP-12 cable, I'm assuming it's effectively just 6 x tx/rx pairs compressed into a small package? (i.e. no LWDM going on in the transceiver?)
- Bayart 4y agoIt's fascinating to think you can combine and split signals on the fly with prisms. It should be completely obvious but I've never thought about it, my mind is far too set into digital habits. By comparison electronics feel so slow.
- twarge 4y agoIt's the micron-precise alignment of the four beams that is astonishing. I can't see which part(s) is actively aligned to line up the beams. Tom
- ExoticPearTree 4y agoYes. There are optical switches out in the market that use prisms to switch lambdas without any optical-electrical-optical conversion.
- ycui1986 4y agoThose are not prism. Prism implies it used as dispersion component, which is not the case. The thing does the real work there is the dichroic thin film coating on those prism shaped glass.
- dncornholio 4y agoDoes Mastodon not allow longer posts or does the OP thinks the story would be better in different posts?
- neogodless 4y agoThe poster puts over 1100 characters in one of the posts, while the default Mastodon server limits to 500 characters. It may be more about images - I think there's a default maximum of 4 images per post, so overall it kind of makes sense to tie each post's text with the matching image(s).
- macshome 4y agoThe headline here should probably be updated as this is an optical module teardown, not a cable teardown.
- markonen 4y ago100G-LR4 is a technology that's on its way out, and this illustrates why. Muxing four 25G lanes is complex and costly and these days also unnecessary at 100G. 100G is going single lambda. This is still the way to build 200G/400G/800G optics, though.
- brooksbp 4y agoTuning Tx/Rx for NRZ can be challenging. PAM4 is going to be fun.
- MichaelZuo 4y ago800G would be muxing 8 100G lanes? That must be pricy!
- markonen 4y agoIt's 8×100G yeah, but they also use two fiber pairs so four lanes go on each. The QSFP-DD modules are also bigger (they stick out further from the slot) and have more power available, so that probably helps somewhat with engineering.
- MichaelZuo 4y agoIt's incredible how advanced the technology is, that fully saturates PCIE5.0 x16. but at a distance 1 million times farther.
- MichaelZuo 4y agoVery cool thanks for sharing, those Retimer chips must be quite something to handle the data flow 24/7 without ever failing.
- empiricus 4y agoThat TOSA looks like alien technology you would find on a 1 million years lost starship.