4 ms·
In modern DDR5 settings the RAM speeds of DIMM slots are actually significantly slower than the RAM speeds of soldered chips. Modern chips are hugely dependent
by jeroenhd 4y ago
In modern DDR5 settings the RAM speeds of DIMM slots are actually significantly slower than the RAM speeds of soldered chips. Modern chips are hugely dependent on RAM speeds for optimum performance and with the way the M1/M2 platform evolved from smartphones and tablets where everything is close to the CPU/GPU and soldered down I'd expect their chips to be optimised for this layout.
Apple is blatantly anti upgrade (just see the SSD situation on their desktop offerings) but that's not the only reason they solder stuff down.
I believe Dell is working on a new, open design for PCBs where this performance problem is smaller or even nonexistent. You lose the ability to do partial upgrades with the new system but gain the performance impact that is driving some companies to soldering down RAM for performance reasons.
For devices with slower RAM there is no excuse. Just an upsell to make you pay $100 for 8GiB of RAM.
- codedokode 4y agoI would prefer to have 32 Gb of cheap "slow" 3200 MT/s RAM rather than 4 or 8 Gb of soldered 4300 MT/s LPDDR4 RAM. The increase in speed isn't worth decrease in size. Also, in cheap laptops soldered RAM often has lower speeds, same as replaceable one. And if RAM has to be soldered, then the board with CPU, GPU and RAM could be made replaceable so that you can upgrade it later without buying a new device. Obviously, manufacturers don't want that.
- jeroenhd 4y ago> And if RAM has to be soldered, then the board with CPU, GPU and RAM could be made replaceable so that you can upgrade it later without buying a new device. Obviously, manufacturers don't want that. Dell is on a new replaceable RAM standard. It's already been designed for their own products, but they're working with JEDEC to make it a standard: https://www.storagereview.com/review/dell-camm-dram-the-new-laptop-standard https://www.storagereview.com/review/dell-camm-dram-the-new-... I also prefer upgradeable laptops over bleeding edge performance but the reality is that most consumers never upgrade their laptops (and if they do, only to add more storage). Until a large amount of customers start factoring repairability and upgradeability into their purchasing decisions, we'll only see soldered down RAM.
- vladvasiliu 4y agoI don't know about the specifics of DDR5, and specifically LPDDR5, as used by Apple, but many other manufacturers solder their chips, although their specs say that the speed is the same as in models with separate DIMMs. One such example is the HP Elitebook 1040 G9. The tablet-like version has soldered RAM, whereas the regular has external modules. They both use 4800 MHz DDR5.
- codedokode 4y agoRegarding Apple Silicon, they claim that their soldered LPDDR5-6400 RAM can provide 100Gb/s of bandwith (per one chip?), which is amazing, but it seems that the CPU cannot fully utilize this bandwith. For comparison, a cheap removable DDR4 module at 3200MT/s can provide theoretical bandwith around 25 Gb/s and two of them can provide 50 Gb/s which is also very fast (for me) and good enough for many tasks. More expensive DDR5 modules can provide up to 50 Gb/s bandwidth per module, and four of them give you 200 Gb/s of theoretical throughput. So I don't see problems with using removable DDR5 modules. They are good enough, and being able to expand RAM cheaply is more important, than getting 2x bandwidth, that you cannot utilize, at a premium price.