3 ms·
I think it's easier to just source (used)office desktops and x86-based thin clients at this stage. There are only upsides to it e.g. no SD corruption, power ada
by numpad0 4y ago
I think it's easier to just source (used)office desktops and x86-based thin clients at this stage. There are only upsides to it e.g. no SD corruption, power adapter compatibility issues, overheating problems, etc., so long that you don't need the exact Pi form factor or Pi HAT interface compatibility.
- tssva 4y ago> There are only upsides to it e.g. no SD corruption, power adapter compatibility issues, overheating problems Boot your Pi from USB and there is no SD corruption to worry about. This has been out of beta and officially supported for over 2 years now. I've never had an issue with power adapter compatibility but understand some had issues when the RPi 4 was released due to it requiring more amperage than previous models. Not really a concern with modern USB C adapters and if you are really concerned just buy the official power supply or one of the multitudes sold on Amazon as for the RPi. As for overheating, I have had a RPi 4 stuffed in a crowded wiring box with no air flow in my unconditioned garage running non-stop without overheating for a few years now. I live in a climate where it is over 90 degrees Fahrenheit every day June - early September with a good part of late July - late August being over 100. I also have a 4 node RPi cluster which has been running for years without any overheating issues. The cluster nodes do have 5v fans running at 3.3v to reduce noise. I installed these when originally setting up the cluster but would be confident removing them. At this point it just isn't worth the effort to do so.
- wil421 4y agoNo GPIO.