3 ms·
>it's incredible the engineering that goes into getting a signal (in the case of this site, 10 signals) into an FM antenna system 300m above the earth! this is
by dylan604 4y ago
>it's incredible the engineering that goes into getting a signal (in the case of this site, 10 signals) into an FM antenna system 300m above the earth!
this is what always amazed me. we used to drive by/through the local antenna farm in my area, and it always impressed me as a kid that these towers was where the radio/tv signals originated. driving by, you could see the bases of some of them were on a single point of an inverted pyramid which revealed the importance of the guide wires. these were the first structures that i understood to be designed to move. then learning stories of the power of the signal, the amount of electricity to create that power, the fact that the AM signals could change their wattage at night to be more powerful, that video was an AM signal with the audio being FM all multiplexed together.
then there was the time that a military jet clipped the guide wires forcing the 2 occupants to eject and causing the station on that tower to go off the air. or the much more gruesome time a local teenager climbed one of the smaller towers, thinking he could recreate an action movie scene, attempted to slide down the guide wires. the attempt was not successful as it sliced off his fingers causing him to free fall catching a lower wire which created 2 halves of him. in case anyone thinks of trying this, don't.
after all of that, wound up becoming a video engineer.
- sokoloff 4y agoAM stations generally reduce their power at night, rather than increase it.
- iefbr14 4y agoYeah that was later because the power stations caused too much interference. The reach of medium wave increases at night and you get some local interference of far stations. They mitigated that by raising their local power causing even more interference. FCC stopped that :)
- dreamcompiler 4y ago> could see the bases of some of them were on a single point of an inverted pyramid I was under the impression these towers were AM because such a long wavelength is needed for AM radio stations that the whole tower is the antenna, with an insulator between the point of the inverter pyramid and the ground. FM towers are not like this; the wavelength is much shorter and the tower is not part of the antenna. The antenna is a short element at the top insulated from the tower. Happy to be corrected.
- geerlingguy 4y agoFM antennas are indeed placed as high up as possible on these towers, but the tower itself, being a guyed model and not freestanding, does come down to a "ball and socket" joint at the bottom, which allows the tower to move around slightly under the tremendous pressure of the guy wires yanking it down to earth. Apparently there's a deep 25'x25' slab of concrete underneath that holds the socket the tower rests on.
- vel0city 4y agoFYI, they're guy-wires not guide wires. https://en.m.wikipedia.org/wiki/Guy-wire https://en.m.wikipedia.org/wiki/Guy-wire
- dylan604 4y agoyes, sorry, but you're clearly "not from around these parts". https://en.wikipedia.org/wiki/Guide_wire https://en.wikipedia.org/wiki/Guide_wire •Alternate spelling to guy-wire
- djmips 4y agoEnough people say it wrong it eventually becomes right. There's nothing definitive about language except for usage...
- q-big 4y ago> Enough people say it wrong it eventually becomes right. There's nothing definitive about language except for usage... This is a view that is common among English speakers. Among many German native speakers it is instead common to love to analyze words and tell why some word is wrong even if it is actually in common use sometimes for decades.
- vel0city 4y agoBut it doesn't make sense to call it a "guide wire", it's not "guiding" anything. It is however guying the tower. guy; 3rd person present: guys; past tense: guyed; past participle: guyed; gerund or present participle: guying secure with a line or lines. "it was set on concrete footings and guyed with steel cable"
- Retric 4y agoLinguistically it’s easy to see why people would blur the line from cables that did guide something. People use cables or ropes to guide long poles or similar structures into position and then tie them down for stability. Cranes of are of course easier, but not always available such as when replacing a sailing ships mast at sea. Guy wires are often used similarly if for example wind loads are an issue during construction their tension need to be adjusted appropriately.
- Kye 4y agoThe noise these wires make when struck became the sound of blasters in Star Wars.