3 ms·
The length of time they annealed for is staggering. I believe it was continuously rotated throughout that time, to ensure even thermal and mechanical load. I a
by ggm 4y ago
The length of time they annealed for is staggering. I believe it was continuously rotated throughout that time, to ensure even thermal and mechanical load.
I also like that they pressed on with annealing the first cast even though it was a reject. Avoid the unknown when you repeat for the final one.
There's a blog post I can't find any more about a camera nut visiting one of the last Japanese refactories capable of making lenses and the excruciating processes they go through to make complex zonally variant glass. Mirrors seem almost simple by comparison.
- bruce511 4y agoYes, I was struck by the length of cooling as well. A year sounds like an arbitrary period, but seems long. I mean, assuming the glass starts at like 1000 degs, (I have no idea) that means cooling about 2.5 degrees per day. Which I assume means inside an active furnace. The additional energy, and hence cost of the finished glass but have been massive. Presumably they learned this would be necessary from the test piece, which presumably cracked at some point.
- defrost 4y ago> I mean, assuming the glass starts at like 1000 degs, (I have no idea) that means cooling about 2.5 degrees per day. It's relevant to remember that this is a gradient tempreture throughout the mass that declines and not a uniform fall throughout. An analog might be to think of a porous spongy material (clay, heavy peat moss, etc) and water .. annealing is the process of slowly leaching out the tempreture (or water) with no abrupt gradient changes that lead to cracking. As the temp. in the annealing furnace is staged down, there must be a pause to allow the heat to flow out from the mass centre to match the furnace before the next reduction. > Which I assume means inside an active furnace. Ideally a very well insulated furnace so that little energy input is required to maintain the desired furnace mean.
- martyvis 4y agoAnd grinding and polishing away the 4½ tons of glass in the blank to make it parabolic took 14 years!
- gambiting 4y agoIt says the mirror was installed 4 years after being made, where did you get 14 years from?
- martyvis 4y agoI haven't read this through thoroughly, but a lot of the final polishing must have been done after it was in place. It was only moved from Pasadena to Mount Palomar in 1947. There is both a '47 and '49 as being when figuring was done. https://sites.astro.caltech.edu/palomar/about/history.html https://sites.astro.caltech.edu/palomar/about/history.html
- anotherboffin 4y ago> There's a blog post I can't find any more about a camera nut visiting one of the last Japanese refactories capable of making lenses and the excruciating processes they go through to make complex zonally variant glass. Was it this one? https://www.imaging-resource.com/news/2018/04/17/glass-for-geeks-an-in-depth-tour-of-nikons-hikari-glass-factory https://www.imaging-resource.com/news/2018/04/17/glass-for-g...
- tony_cannistra 4y agoNot the OP, but that was a great article - thanks.
- thanatos519 4y ago> I also like that they pressed on with annealing the first cast even though it was a reject. Avoid the unknown when you repeat for the final one. If only we did this for software instead of just keeping the reject.
- lloydatkinson 4y agoInstead, every "MVP" project I've been on has ended up as the final shipped product. Often with no further improvements at all, let alone anything the user asked for. Big Agile really has poisoned the industry.