5 ms·

What is DIMM training and what is the PSP?

• mlindner 4y ago
  My very limited understanding of DIMM training is that it's about the digital system learning and setting the precise analog timing settings required to talk to the DIMM. Every memory cell has tiny manufacturing differences and so these need to be learned on the fly at computer boot and they change over time with use so need to be re-determined every boot.
  • eaasen 4y ago
    Timing adjustment per x number of data bits has been required since DDR3 but DDR4 also has internal reference voltage calibration for DQ bits (VREF_DQ). This voltage sets threshold by which the IO cell determines if a voltage represents a logic high or low. This VREF_DQ value is calibrated per x number of bits in addition to adjusting the timing to try to find the best place to sample the signal.
• magicalhippo 4y ago
  This[1] page does a decent job of going into the initialization procedures of DDR4, and why the various steps are needed. Really quite fascinating and complex, due to the high speed. The essence is that the signals are so high-speed, ie each bit takes a very short time, that the physical distances between DIMM modules and DRAM modules on a DIMM start to matter and has to be compensated for so that all relevant signals arrive at the same time at a given DRAM module. [1]: https://www.systemverilog.io/ddr4-initialization-and-calibration https://www.systemverilog.io/ddr4-initialization-and-calibra...