3 ms·
10G over fiber or DAC is cheap if you get used enterprise equipment, but 10G-BaseT is still expensive. For mikrotik, you can get 8x sfp+ ports for about twice
by toast0 4y ago
10G over fiber or DAC is cheap if you get used enterprise equipment, but 10G-BaseT is still expensive.
For mikrotik, you can get 8x sfp+ ports for about twice the cost of this switch, then you've got to pay for the tranceivers you want.
There's also the question of if existing cabling will work for 10G vs 2.5G, recabling is not realistic for most.
- bpye 4y agoIf you only need a couple 10G-BaseT ports you can get 10G SFP+ modules which in my experience work well enough. They do get quite hot, but I only needed 10G-BaseT for my desktop whilst everything else at 10G is DAC.
- AdrianB1 4y agoI am on 10 Gbps is parts of my house for a while, 10G on UTP consumes a lot of power and you cannot realistically fill a SFP+ switch with RJ45 transceivers because of that; they are also very expensive for what they provide. At the same time, a SFP+ NIC and a DAC or AOC cable is a lot cheaper and low power. In most cases existing cabling is CAT 5e, you can run 2.5 Gbps with no problem, while 10 G requires re-cabling. This is practically the reason 2.5 Gbps exists: it is the limit of existing Cat 5e infrastructure, just put a switch and you're done.