3 ms·
While I find it very interesting that boron nitride can outperform all other white pigments in the combination between total solar reflectance and layer thickne
by adrian_b 4y ago
While I find it very interesting that boron nitride can outperform all other white pigments in the combination between total solar reflectance and layer thickness, I believe that an another approach for making a white paint is even more promising.
That method is described in the reference #17 from the bibliography of this paper.
There are 2 methods that can be used to make a white paint.
The first is to use a polymer as a binder and incorporate in it very small particles with high refractive index, i.e. a white pigment powder.
The second method is to make a polymer that solidifies as a foam. In this case, the polymer contains voids filled with air having low refractive index, instead of pigment particles, but the effect of the optical non-homogeneity is the same, so both foams and powders are white, when they do not absorb light.
The reference #17 describes such a method of making a polymeric foam, which can be used as a paint.
According to the table from this paper about boron nitride, the previous best combination of total solar reflectance and layer thickness and layer density was for that polymeric foam, which had a 96% total solar reflectance and a 300 micron thickness, outperforming all the previous paints based on white pigments.
While that foam had a slightly lower total solar reflectance, it had a better far infrared emittance, so the cooling performance was similar, i.e. of about 6 Celsius degrees below the air temperature.
Because the methods that use foams do not need pigments, they have the potential to be cheaper than the methods with pigments, which need both a polymer as binder and a mineral pigment.
Moreover, methods to make foams can be adapted to many different kinds of polymers, so there are chances that other polymers with even better performances or even lower cost can be found, perhaps a silicone polymer in foam form (silicones can have perfect resistance to solar light in outdoor conditions).