4 ms·
I just need a firmware that will connect to Home Assistant so it can track my soldering habits. Just joking... mostly.
by outworlder 4y ago
I just need a firmware that will connect to Home Assistant so it can track my soldering habits.
Just joking... mostly.
- lapetitejort 4y agoAs someone who has left their soldering iron run overnight, this might be useful...
- linker3000 4y agoMost soldering iron firmware includes a sensor routine that turns them off if movement stops for a set period.
- GravitasFailure 4y agoThe Pinecil V2 has a new processor with Bluetooth. I'm a little fuzzy on whether it offers WiFi as well, but Pine64 suggested it could be used to automatically activate a fume extractor based on the tip temperature. Home Assistant integration wouldn't be hard.
- nathan_f77 4y agoI actually did set up a smart plug for my soldering iron in Home Assistant [1]. I set it up with a timer and presence detection (using my phone and watch) so that I don't leave it on by accident. After reading this thread, it sounds like I need to get myself a better soldering iron and install IronOS [1] https://imgur.com/a/asZbVP7 https://imgur.com/a/asZbVP7