6 ms·

KTM Unveils A Revamped 890 Adventure R for 2023

48 points by tiew9Vii 4y ago

tiew9Vii 4y ago
Not the usual Hacker News post, but I thought I'd share it as it's interesting with the direction of modern automotive software and software blocks. > KTM has also taken advantage of the growing electronic capacity of the 890 Adventure R to install a new DEMO MODE, seen for the first time on this 2023 model. The new mode will allow riders to sample the full electronic rider aids suite of the bike for the first 1,500 kilometers (932 miles), before the rider decides which pack or features to acquire. As an owner, you purchase a $25,000 AUD / $15,000 USD motorcycle, and all the built-in hardware works for 1500km/932 miles. At 1500km/932 miles, the functionality is taken away automatically, and you are then software blocked from using the full capabilities of a vehicle you purchased until you pay for it to be unblocked. Some of the functionality software blocked is being able to adjust traction control when off road...this is a motorcycle designed to go off-road, so a big piece of functionality people buy this bike for. The other is downshifting with the quick shifter. All the hardware is built in. It works for 1500km then stops until you pay up.
- manaskarekar 4y ago
  Is there an option to buy it without the additional hardware?
  - martin_a 4y ago
    That would defeat the purpose of streamlining production and being able to sell the subscription services, so probably no. But on the other hand, pricing is not yet published, so time will tell.
- 6c737133 4y ago
  I continue to hope that people will vote with their wallets and kill this garbage... but then I remember, look at the current state of 'smart TVs' or even the dying industry of residential printer ... adware bloated fake-limited trash Govs at a UN-level need to kill this shit... but sadly, capitalism is a core tenant of most UN members, and these scummy tactics generate revenue... so.... I've used a lot of words to 'fuck. we're fucked.' :(
  - vorador 4y ago
    I had to look up the hack people used to do back in the day to have their cheap sennheiser basically become a model that's $100 more (https://hackaday.com/2011/02/12/uncrippling-lower-model-speakers/ https://hackaday.com/2011/02/12/uncrippling-lower-model-spea...). That was 10 years ago! So yeah, this trend is going to stay for a while.
    - m463 4y ago
      I remember when you could change 24x cdrom drives to the 48x version.
      - deleted 4y ago
        [deleted]
      - sjsdaiuasgdia 4y ago
        Punching holes in 3.5" floppies to turn 720kb double density into 1.44mb high density will remain my favorite removable media hack. Saved me so much money as a kid.
- jvilalta 4y ago
  Would an equivalent bike with the extra features cost the same or more? Am curious if turning off the features makes it less expensive to get started with a basic bike.
  - digdugdirk 4y ago
    It would cost the exact same. The majority of these features require hardware aspects (the quickshifter needs to interact with throttle/fuel/ignition, traction control systems require sensors to monitor wheelslip and engine conditions) that come installed from the factory. The subscription service just turns the features on/off. To make a computer analogy - imagine if the every MacBook in the lineup was shipped with 32gb of ram soldered in as standard, and then Apple disabled 28gb of that via software. Sure, they could sell you the "flexibility" to upgrade at any time (maybe even on an hourly basis in case you need some extra oomph to finish up your compiling!) but we'd all know that the reality is they're holding the product that you already purchased hostage in exchange for a recurring source of revenue.
    - pedrocr 4y ago
      That computer analogy is exactly how IBM runs their mainframe hardware. Over-provision the hardware and then unlock it as you pay up. It's a delivery model that didn't use to make sense in consumer devices because the manufacturer would have to pay for all the hardware even if they weren't selling the feature. It seems lately it has become profitable to do it. I guess it means you have to deal with less SKUs and thus saves enough money in manufacturing to compensate for the extra parts/complexity. Probably because a lot of the complexity has moved to software so the hardware is the same anyway.
      - teddyh 4y ago
        “CAUTION. Do not remove the wire from pin 4AB to 7FL in the CPU enclosure. This wire is located approximately 7 inches up from the bottom of the backplane in bay 2 and should not be removed by using a GE 112-3 wire unwrapping tool, first not removing the wrapping from 4AB, then pulling the wire from under the other wiring to its bound end at 7FL, followed by not unwrapping the bound end from 7FL. Not removing this wire will result in the normal clockspeed which is 1.6 times slower than with the wire removed and will not cause corresponding increases in system throughput.” — https://www.cs.earlham.edu/~skylar/humor/Unix/computer.folklore.from.net.rumors.html https://www.cs.earlham.edu/~skylar/humor/Unix/computer.folkl...
- martin_a 4y ago
  As a motorbike rider myself, I find this terrible. It obviously makes the whole bike more expensive as you have to integrate all the hardware, which can break down although you might have never used it. Isn't BMW going to do something like that with its cars, too? A question that might arise from that: Say I don't use/buy a specific feature for the first X years and want to have it enabled after that. It then turns out that the hardware required for that is broken. Who's liable for that and has to pay? In a classical scenario, I'd have sth. like a two year warranty on the newly integrated parts, but as those parts were integrated for the X years I've already owned the car/bike and the defect has just come up as they were activated now...
  - avalys 4y ago
    It's not really clear that this makes the whole bike more expensive. Most of the expense for features like this is in the design and engineering, not raw parts costs. Shipping all the bikes with the same hardware but enabling options in software might actually make the base bike less expensive than if they had to design and manufacture two different physical configurations.
    - martin_a 4y ago
      > Most of the expense for features like this is in the design and engineering, not raw parts costs. [...] might actually make the base bike less expensive Yeah, I'm not sure about that. BMW wants to integrate heated seats in all models and only activate them through a subscription, if I remember correctly. While that might streamline production and therefore lead to optimizations, I doubt that those will be passed on to the customer. But you now have more servicable parts, weight etc. pp. in ALL models with a chance that they break... We've played enough of the capitalism game to know that this is not about the customer and a better price for him.
      - ce4 4y ago
        I agree with your last sentence - but i doubt that the baseline price will be that much higher via added parts like heated grips (it's just a flexcable/flexible PCB under the rubber hand grip + external wiring). The gearshift lever sensor (piezo electric module) should also not be too expensive. The expensive parts are the electronics sourced from 3rd party vendors (eg. the 6 axle IMU to enable cornering ABS, traction control, anti-wheelie control and so on which I guess is mostly sourced from Bosch, or the emission control). And of course meeting and proving conformance to all the regulation
- avalys 4y ago
  I don't see the problem. Manufacturers have been selling "options packages" for decades. You can either buy the base bike for $15,000, or one with "premium package" for $18,000. It's obvious to everyone that the extra doodads you're buying don't actually cost them $3,000 more. It's just a way for them to segment the market and charge more for those who are willing to pay. The alternative is, they sell a single configuration for $17,000. Now they're just saying, hey, most of this functionality is in software anyway. Rather than pretend that the $10 sensor needed to enable the quick shifter costs $3,000, they're going to put the $10 sensor in all the bikes and charge you for the software required to use it. And like most software, you can get a free trial before you need to decide if you want it. So what? It's also quite possible that these extra features actually don't require any additional hardware at all. The bike already has wheel speed sensors, accelerometers, etc. for the "base" ABS functionality and the advanced stuff you're paying for might be entirely in software.
  - dm319 4y ago
    The bike comes with the hardware required to allow this functionality (a quick shifter needs the physical ability to reduce the torque to the gearbox to work), what a waste of the world's resources to kit out these machines with these electronics and technology, and then not allow people who have physically bought the device to make use of it.
    - avalys 4y ago
      We're talking about a $15,000 off-road premium European motorcycle that burns gasoline for rich young guys to have fun tearing through the wilderness. That's a "waste of the world's resources". The $10 sensor on the shift lever that you're complaining about is inconsequential.
      - 10u152 4y ago
        Big adv bikes are generally for older gents. Young guys are on 250s and 400s and 500s
    - ce4 4y ago
- dm319 4y ago
  I can't stand this. If I buy a vehicle I expect to own it, not be locked out of hardware that has used the Earth's resources to exist, and has been 'paid' for by the consumers as a whole. What a waste.
- kybernetyk 4y ago
  >All the hardware is built in. It works for 1500km then stops until you pay up. Which I think is an improvement. I always used to add features to my cars that were available from the factory as an option but which I didn't order. Usually the process involved adding the hardware (spare parts, etc) and then changing flags in the car's system via OBD. But when the hardware is already there this becomes way simpler: Just change the flags in the firmware and you're done.
  - aaaaaaaaaaab 4y ago
    Unless the firmware is code-signed.
- flyinglizard 4y ago
  It’s just something to negotiate with the dealer, being that as software it’s a “zero cost” thing. I’m doing just that on a Duke 890R now. “Give me the software for free”, and they do (I’m not in the US; YMMV. Go buy a Ducati)
- ce4 4y ago
  I own the predecessor bike, the KTM 790 Adventure (non-R though because both my wife + me ride it and the R's seat height only fits me). The 790 from 2019 (and the 790 Duke from 2017+) have a TFT and upgradable software-packages already, amongst other models. That includes ride-modes, up/down quick-shifter and probably more. (Heated grips are NOT actually pre-fitted and the control box installed only if you order the feature and it is separate from the LCD). I bought every package except rallye-mode. If you need that, just shell out the 250€ or what it actually costs. Not a big deal, as the bulk of riders will not use that anyway. As a former BMW-motorcycle rider I'm also used to check all the extras/upgrades anyway. What irks me more is the mandatory cloud-based maintenance "book", bugs in the firmware (the headlight doesn't switch off for "security" reasons if you turn off the bike in motion - and it will drain the battery until it's flat. I had a number of empty battery situations and one dead battery due to this silly feature already and complained but the manufacturer is unwilling to fix it). Also the upgradable packages require the dealership to acquire a software license directly from KTM, no bypassing allowed. So this all follows Tesla more or less, I expcect always-on connectivity in a few years. BMW Motorcycles already has that for some (?) of it's motorcycle models (if you buy the SOS-/"crash-detected-the-bike-calls-911"-feature). Edit: small typo/grammar corrections + better wording.
- jskrablin 4y ago
  Other than that all of the extra sensors, wiring and software bugs are making new/recent road going (this is off road vehicle in the same sense as SUVs are) motorbikes quite unreliable, often leaving official service providers scratching their heads re why something refuses to work. FI is nice, so is ABS (with a switch to turn it off when offroading, which is rare nowadays). Everything else is just asking for problems.
- baybal2 4y ago
  > All the hardware is built in. It works for 1500km then stops until you pay up. So, ABS disengages at 1500kms, and you fall on the first puddle of water? (This is a big, heavy bike)
- culopatin 4y ago
  You could look at it differently and think that they allow you to take discounts from the full price of the bike for features you don’t want. The price of the bike is not the base price, is the one with all the features enabled, you then choose to save on the ones that you don’t want.
mring33621 4y ago
Anyone know how much the 'upgrade' costs, once the trial period ends? It's hard to know how upset to be, without knowing the cost. Also, will it be one time payment or a recurring charge?
- blutack 4y ago
  From https://www.motorcyclenews.com/bike-reviews/ktm/890-adventure-r/2021/ https://www.motorcyclenews.com/bike-reviews/ktm/890-adventur... for the current model, which has the same upgrades thing but doesn't have the demo mode (that's the new thing). USD pretty much equals GBP currently. Considering the R costs a penny shy of £12,000 it is a shame that KTM have pared back on its standard equipment. If you want cruise control (its new buttons are standard fitment) that will be an extra £225.61, the up/down quickshifter is a further £361.51, MSR (engine braking control) £135.01 and adding ‘Rally’ mode will be £180.34. Or you can buy the ‘Tech Pack’ for £769.30 which has them all for a discounted price. Heated grips are £225.66 extra and while the dash has connectivity, you need to pay £7.99 for the KTM MyRide Navigation app to add a basic ‘turn-by-turn’ navigation system. They do note that it is still reasonable value compared to other bikes in the class even with the options added, as competitors either don't have these options at all or they are only available on higher spec models.
deleted 4y ago
[deleted]
peterlk 4y ago
Something that often gets overlooked in systems like this what happens when there are bugs. Mechanical control systems are often designed to be durable, and this gives rise to simplicity. Why add all this complexity? What happens when a bug in the software of the bike locks me out of functionality I’ve paid for? This approach is so user hostile. A bike throttle connected to a carburetor is beautifully elegant. Twist throttle -> pull wire -> wire pulls open air intake valve. If anything ever goes wrong with this system, it’s usually a $5 wire that needs to be replaced (fuel mixture problems are further down in the pipeline.
- serf 4y ago
  >A bike throttle connected to a carburetor is beautifully elegant. it's also inefficient and wasteful. we've gone through this revolution in cars already; the benefits don't need to be constantly stated every time -- Reduced weight, reduced mechanical wear, greater efficiencies across the board. Usually cheaper to produce and easier to partially automate production. Yes -- things are more complicated and sometimes difficult or impossible for end users to modify or repair -- the fact of the matter is that there are less and less people interested in self repair as time goes on, so the manufacturers cater to that crowd less and cater to the higher paying crowds more. The reality is that very few people have the knowledge for carburetor self repair -- that also happens to be true for firmware debugging and ecm modification. The specialties are just shifting.
  - beej71 4y ago
    I wouldn't mind a move to fuel injection on small dual sports (mine's a DRZ400S). (And some have already made the move.) But that's about it. No more computerized anything, if you please. These bikes are fun and useful because they are simple. And when they quit running in the middle of nowhere, odds are good you can get it going again with the tools you have on hand. It's difficult to overstate how mad I'd be to have to call for a tow because of a software fault. :D
- Swizec 4y ago
  I like the drive-by-wire throttle in my bike. The traction control it enables has saved me a few times. Like when hitting wet leaves or a moist metal grate. The yellow light blinks, you crap your pants a little, and survive the little skid without even a story to tell. Much better than scooping yourself off the pavement. More expensive bikes even have rain and sport modes that modify throttle response. All impossible without drive by wire.
ramesh31 4y ago
> Upgraded 5” TFT display with USB connection, reworked intuitive graphics, and new Turn-by-Turn + navigation (app needed). I’m gonna go out on a limb here and guess that the “app” is an unusable nightmare.
- ce4 4y ago
  Yep, it's crap. But there's an unofficial 3rd party app that reverse engineered the BT connection and enables a number of navigation apps: https://play.google.com/store/apps/details?id=com.undingen.maps4ktm https://play.google.com/store/apps/details?id=com.undingen.m... The app scrapes your main navigation app's notifications and forwards that as text + turn-by-turn arrows to a dedicated area in the motorcycle's display.
cbm-vic-20 4y ago
It will be interesting to see what happens if one of the "subscription" hardware parts that has been deactivated has a problem that renders the rest of the bike unusable. Pretty much every motorcycle I have ever owned ends up with some sort of electrical problem at some point.
- avalys 4y ago
  What's interesting about it? If that occurs past the warranty period, you have to pay out of pocket to replace the defective part like any other. The (hypothetical) fact that the defective part provides no functionality but could disable the bike is just a bad design. There's plenty of examples of bad design in motorcycles.
  - tmh88j 4y ago
    > What's interesting about it? If that occurs past the warranty period, you have to pay out of pocket to replace the defective part like any other. > There's plenty of examples of bad design in motorcycles. Sure, but you don't have to pay just to use the hardware you already own. If a part breaks you're paying 3x for that component - Once with the initial purchase, once to "use it", and again to replace it if it breaks. Do you work for KTM? You've posted numerous times in this thread defending these awful practices and every single response has basically been "I'm fine with being nickel and dimed because the company needs to make money too", which is nonsense because the parts are already paid for.
    - avalys 4y ago
      What “additional fees on top of replacing the part” are you talking about? I don’t work for KTM, I work in optical R&D. I’ve posted multiple times in the thread because I find the groupthink on this topic ridiculous and I enjoy pointing it out. Do you think prices should be set by parts cost alone? What’s the parts cost of a copy of Halo?
      - tmh88j 4y ago
aitchnyu 4y ago
Never had to ride regularly at 60+ kph, are round mirrors as good as aerodynamic (I assume) rectangular-ish mirrors?
- CraigJPerry 4y ago
  All mirrors on a motorbike are for admiring your elbows. To be fair, bar end mirrors, triumph style, work well.
6stringmerc 4y ago
Does that mean they agree not to repossess it after 933 miles when I disable payments?
taylodl 4y ago
I have no problem with enabling features after the sale since it has the potential to increase the lifetime of the project. For example, maybe I don't want the quickshifter. When I go to sell the bike maybe the buyer does. They should be able to enable it. Maybe after I buy the bike the whole market has shifted to where everybody wants a quickshifter. Instead of my bike potentially going to the scrap heap it can go to somebody who enables the quickshifting. Maybe over time I see the value of the quickshifter and decide to enable it. I just see this as win-win-win: the manufacturer, the customer, and the 2nd customer all win.
aaronsb 4y ago
Weirdly enough, I see this as a version of the "Scan and bag your own groceries" approach. It's a cost savings measure that hurts the customer and helps the vendor/manufacturer.

48 points by tiew9Vii 4y ago

Not the usual Hacker News post, but I thought I'd share it as it's interesting with the direction of modern automotive software and software blocks. > KTM has also taken advantage of the growing electronic capacity of the 890 Adventure R to install a new DEMO MODE, seen for the first time on this 2023 model. The new mode will allow riders to sample the full electronic rider aids suite of the bike for the first 1,500 kilometers (932 miles), before the rider decides which pack or features to acquire. As an owner, you purchase a $25,000 AUD / $15,000 USD motorcycle, and all the built-in hardware works for 1500km/932 miles. At 1500km/932 miles, the functionality is taken away automatically, and you are then software blocked from using the full capabilities of a vehicle you purchased until you pay for it to be unblocked. Some of the functionality software blocked is being able to adjust traction control when off road...this is a motorcycle designed to go off-road, so a big piece of functionality people buy this bike for. The other is downshifting with the quick shifter. All the hardware is built in. It works for 1500km then stops until you pay up.

manaskarekar 4y ago
Is there an option to buy it without the additional hardware?
- martin_a 4y ago
  That would defeat the purpose of streamlining production and being able to sell the subscription services, so probably no. But on the other hand, pricing is not yet published, so time will tell.
6c737133 4y ago
I continue to hope that people will vote with their wallets and kill this garbage... but then I remember, look at the current state of 'smart TVs' or even the dying industry of residential printer ... adware bloated fake-limited trash Govs at a UN-level need to kill this shit... but sadly, capitalism is a core tenant of most UN members, and these scummy tactics generate revenue... so.... I've used a lot of words to 'fuck. we're fucked.' :(
- vorador 4y ago
  I had to look up the hack people used to do back in the day to have their cheap sennheiser basically become a model that's $100 more (https://hackaday.com/2011/02/12/uncrippling-lower-model-speakers/ https://hackaday.com/2011/02/12/uncrippling-lower-model-spea...). That was 10 years ago! So yeah, this trend is going to stay for a while.
  - m463 4y ago
    I remember when you could change 24x cdrom drives to the 48x version.
    - deleted 4y ago
      [deleted]
    - sjsdaiuasgdia 4y ago
      Punching holes in 3.5" floppies to turn 720kb double density into 1.44mb high density will remain my favorite removable media hack. Saved me so much money as a kid.
jvilalta 4y ago
Would an equivalent bike with the extra features cost the same or more? Am curious if turning off the features makes it less expensive to get started with a basic bike.
- digdugdirk 4y ago
  It would cost the exact same. The majority of these features require hardware aspects (the quickshifter needs to interact with throttle/fuel/ignition, traction control systems require sensors to monitor wheelslip and engine conditions) that come installed from the factory. The subscription service just turns the features on/off. To make a computer analogy - imagine if the every MacBook in the lineup was shipped with 32gb of ram soldered in as standard, and then Apple disabled 28gb of that via software. Sure, they could sell you the "flexibility" to upgrade at any time (maybe even on an hourly basis in case you need some extra oomph to finish up your compiling!) but we'd all know that the reality is they're holding the product that you already purchased hostage in exchange for a recurring source of revenue.
  - pedrocr 4y ago
    That computer analogy is exactly how IBM runs their mainframe hardware. Over-provision the hardware and then unlock it as you pay up. It's a delivery model that didn't use to make sense in consumer devices because the manufacturer would have to pay for all the hardware even if they weren't selling the feature. It seems lately it has become profitable to do it. I guess it means you have to deal with less SKUs and thus saves enough money in manufacturing to compensate for the extra parts/complexity. Probably because a lot of the complexity has moved to software so the hardware is the same anyway.
    - teddyh 4y ago
      “CAUTION. Do not remove the wire from pin 4AB to 7FL in the CPU enclosure. This wire is located approximately 7 inches up from the bottom of the backplane in bay 2 and should not be removed by using a GE 112-3 wire unwrapping tool, first not removing the wrapping from 4AB, then pulling the wire from under the other wiring to its bound end at 7FL, followed by not unwrapping the bound end from 7FL. Not removing this wire will result in the normal clockspeed which is 1.6 times slower than with the wire removed and will not cause corresponding increases in system throughput.” — https://www.cs.earlham.edu/~skylar/humor/Unix/computer.folklore.from.net.rumors.html https://www.cs.earlham.edu/~skylar/humor/Unix/computer.folkl...
martin_a 4y ago
As a motorbike rider myself, I find this terrible. It obviously makes the whole bike more expensive as you have to integrate all the hardware, which can break down although you might have never used it. Isn't BMW going to do something like that with its cars, too? A question that might arise from that: Say I don't use/buy a specific feature for the first X years and want to have it enabled after that. It then turns out that the hardware required for that is broken. Who's liable for that and has to pay? In a classical scenario, I'd have sth. like a two year warranty on the newly integrated parts, but as those parts were integrated for the X years I've already owned the car/bike and the defect has just come up as they were activated now...
- avalys 4y ago
  It's not really clear that this makes the whole bike more expensive. Most of the expense for features like this is in the design and engineering, not raw parts costs. Shipping all the bikes with the same hardware but enabling options in software might actually make the base bike less expensive than if they had to design and manufacture two different physical configurations.
  - martin_a 4y ago
    > Most of the expense for features like this is in the design and engineering, not raw parts costs. [...] might actually make the base bike less expensive Yeah, I'm not sure about that. BMW wants to integrate heated seats in all models and only activate them through a subscription, if I remember correctly. While that might streamline production and therefore lead to optimizations, I doubt that those will be passed on to the customer. But you now have more servicable parts, weight etc. pp. in ALL models with a chance that they break... We've played enough of the capitalism game to know that this is not about the customer and a better price for him.
    - ce4 4y ago
      I agree with your last sentence - but i doubt that the baseline price will be that much higher via added parts like heated grips (it's just a flexcable/flexible PCB under the rubber hand grip + external wiring). The gearshift lever sensor (piezo electric module) should also not be too expensive. The expensive parts are the electronics sourced from 3rd party vendors (eg. the 6 axle IMU to enable cornering ABS, traction control, anti-wheelie control and so on which I guess is mostly sourced from Bosch, or the emission control). And of course meeting and proving conformance to all the regulation
avalys 4y ago
I don't see the problem. Manufacturers have been selling "options packages" for decades. You can either buy the base bike for $15,000, or one with "premium package" for $18,000. It's obvious to everyone that the extra doodads you're buying don't actually cost them $3,000 more. It's just a way for them to segment the market and charge more for those who are willing to pay. The alternative is, they sell a single configuration for $17,000. Now they're just saying, hey, most of this functionality is in software anyway. Rather than pretend that the $10 sensor needed to enable the quick shifter costs $3,000, they're going to put the $10 sensor in all the bikes and charge you for the software required to use it. And like most software, you can get a free trial before you need to decide if you want it. So what? It's also quite possible that these extra features actually don't require any additional hardware at all. The bike already has wheel speed sensors, accelerometers, etc. for the "base" ABS functionality and the advanced stuff you're paying for might be entirely in software.
- dm319 4y ago
  The bike comes with the hardware required to allow this functionality (a quick shifter needs the physical ability to reduce the torque to the gearbox to work), what a waste of the world's resources to kit out these machines with these electronics and technology, and then not allow people who have physically bought the device to make use of it.
  - avalys 4y ago
    We're talking about a $15,000 off-road premium European motorcycle that burns gasoline for rich young guys to have fun tearing through the wilderness. That's a "waste of the world's resources". The $10 sensor on the shift lever that you're complaining about is inconsequential.
    - 10u152 4y ago
      Big adv bikes are generally for older gents. Young guys are on 250s and 400s and 500s
  - ce4 4y ago
dm319 4y ago
I can't stand this. If I buy a vehicle I expect to own it, not be locked out of hardware that has used the Earth's resources to exist, and has been 'paid' for by the consumers as a whole. What a waste.
kybernetyk 4y ago
>All the hardware is built in. It works for 1500km then stops until you pay up. Which I think is an improvement. I always used to add features to my cars that were available from the factory as an option but which I didn't order. Usually the process involved adding the hardware (spare parts, etc) and then changing flags in the car's system via OBD. But when the hardware is already there this becomes way simpler: Just change the flags in the firmware and you're done.
- aaaaaaaaaaab 4y ago
  Unless the firmware is code-signed.
flyinglizard 4y ago
It’s just something to negotiate with the dealer, being that as software it’s a “zero cost” thing. I’m doing just that on a Duke 890R now. “Give me the software for free”, and they do (I’m not in the US; YMMV. Go buy a Ducati)
ce4 4y ago
I own the predecessor bike, the KTM 790 Adventure (non-R though because both my wife + me ride it and the R's seat height only fits me). The 790 from 2019 (and the 790 Duke from 2017+) have a TFT and upgradable software-packages already, amongst other models. That includes ride-modes, up/down quick-shifter and probably more. (Heated grips are NOT actually pre-fitted and the control box installed only if you order the feature and it is separate from the LCD). I bought every package except rallye-mode. If you need that, just shell out the 250€ or what it actually costs. Not a big deal, as the bulk of riders will not use that anyway. As a former BMW-motorcycle rider I'm also used to check all the extras/upgrades anyway. What irks me more is the mandatory cloud-based maintenance "book", bugs in the firmware (the headlight doesn't switch off for "security" reasons if you turn off the bike in motion - and it will drain the battery until it's flat. I had a number of empty battery situations and one dead battery due to this silly feature already and complained but the manufacturer is unwilling to fix it). Also the upgradable packages require the dealership to acquire a software license directly from KTM, no bypassing allowed. So this all follows Tesla more or less, I expcect always-on connectivity in a few years. BMW Motorcycles already has that for some (?) of it's motorcycle models (if you buy the SOS-/"crash-detected-the-bike-calls-911"-feature). Edit: small typo/grammar corrections + better wording.
jskrablin 4y ago
Other than that all of the extra sensors, wiring and software bugs are making new/recent road going (this is off road vehicle in the same sense as SUVs are) motorbikes quite unreliable, often leaving official service providers scratching their heads re why something refuses to work. FI is nice, so is ABS (with a switch to turn it off when offroading, which is rare nowadays). Everything else is just asking for problems.
baybal2 4y ago
> All the hardware is built in. It works for 1500km then stops until you pay up. So, ABS disengages at 1500kms, and you fall on the first puddle of water? (This is a big, heavy bike)
culopatin 4y ago
You could look at it differently and think that they allow you to take discounts from the full price of the bike for features you don’t want. The price of the bike is not the base price, is the one with all the features enabled, you then choose to save on the ones that you don’t want.

mring33621 4y ago

Anyone know how much the 'upgrade' costs, once the trial period ends? It's hard to know how upset to be, without knowing the cost. Also, will it be one time payment or a recurring charge?

blutack 4y ago
From https://www.motorcyclenews.com/bike-reviews/ktm/890-adventure-r/2021/ https://www.motorcyclenews.com/bike-reviews/ktm/890-adventur... for the current model, which has the same upgrades thing but doesn't have the demo mode (that's the new thing). USD pretty much equals GBP currently. Considering the R costs a penny shy of £12,000 it is a shame that KTM have pared back on its standard equipment. If you want cruise control (its new buttons are standard fitment) that will be an extra £225.61, the up/down quickshifter is a further £361.51, MSR (engine braking control) £135.01 and adding ‘Rally’ mode will be £180.34. Or you can buy the ‘Tech Pack’ for £769.30 which has them all for a discounted price. Heated grips are £225.66 extra and while the dash has connectivity, you need to pay £7.99 for the KTM MyRide Navigation app to add a basic ‘turn-by-turn’ navigation system. They do note that it is still reasonable value compared to other bikes in the class even with the options added, as competitors either don't have these options at all or they are only available on higher spec models.

deleted 4y ago

[deleted]

peterlk 4y ago

Something that often gets overlooked in systems like this what happens when there are bugs. Mechanical control systems are often designed to be durable, and this gives rise to simplicity. Why add all this complexity? What happens when a bug in the software of the bike locks me out of functionality I’ve paid for? This approach is so user hostile. A bike throttle connected to a carburetor is beautifully elegant. Twist throttle -> pull wire -> wire pulls open air intake valve. If anything ever goes wrong with this system, it’s usually a $5 wire that needs to be replaced (fuel mixture problems are further down in the pipeline.

serf 4y ago
>A bike throttle connected to a carburetor is beautifully elegant. it's also inefficient and wasteful. we've gone through this revolution in cars already; the benefits don't need to be constantly stated every time -- Reduced weight, reduced mechanical wear, greater efficiencies across the board. Usually cheaper to produce and easier to partially automate production. Yes -- things are more complicated and sometimes difficult or impossible for end users to modify or repair -- the fact of the matter is that there are less and less people interested in self repair as time goes on, so the manufacturers cater to that crowd less and cater to the higher paying crowds more. The reality is that very few people have the knowledge for carburetor self repair -- that also happens to be true for firmware debugging and ecm modification. The specialties are just shifting.
- beej71 4y ago
  I wouldn't mind a move to fuel injection on small dual sports (mine's a DRZ400S). (And some have already made the move.) But that's about it. No more computerized anything, if you please. These bikes are fun and useful because they are simple. And when they quit running in the middle of nowhere, odds are good you can get it going again with the tools you have on hand. It's difficult to overstate how mad I'd be to have to call for a tow because of a software fault. :D
Swizec 4y ago
I like the drive-by-wire throttle in my bike. The traction control it enables has saved me a few times. Like when hitting wet leaves or a moist metal grate. The yellow light blinks, you crap your pants a little, and survive the little skid without even a story to tell. Much better than scooping yourself off the pavement. More expensive bikes even have rain and sport modes that modify throttle response. All impossible without drive by wire.

ramesh31 4y ago

> Upgraded 5” TFT display with USB connection, reworked intuitive graphics, and new Turn-by-Turn + navigation (app needed). I’m gonna go out on a limb here and guess that the “app” is an unusable nightmare.

ce4 4y ago
Yep, it's crap. But there's an unofficial 3rd party app that reverse engineered the BT connection and enables a number of navigation apps: https://play.google.com/store/apps/details?id=com.undingen.maps4ktm https://play.google.com/store/apps/details?id=com.undingen.m... The app scrapes your main navigation app's notifications and forwards that as text + turn-by-turn arrows to a dedicated area in the motorcycle's display.

cbm-vic-20 4y ago

It will be interesting to see what happens if one of the "subscription" hardware parts that has been deactivated has a problem that renders the rest of the bike unusable. Pretty much every motorcycle I have ever owned ends up with some sort of electrical problem at some point.

avalys 4y ago
What's interesting about it? If that occurs past the warranty period, you have to pay out of pocket to replace the defective part like any other. The (hypothetical) fact that the defective part provides no functionality but could disable the bike is just a bad design. There's plenty of examples of bad design in motorcycles.
- tmh88j 4y ago
  > What's interesting about it? If that occurs past the warranty period, you have to pay out of pocket to replace the defective part like any other. > There's plenty of examples of bad design in motorcycles. Sure, but you don't have to pay just to use the hardware you already own. If a part breaks you're paying 3x for that component - Once with the initial purchase, once to "use it", and again to replace it if it breaks. Do you work for KTM? You've posted numerous times in this thread defending these awful practices and every single response has basically been "I'm fine with being nickel and dimed because the company needs to make money too", which is nonsense because the parts are already paid for.
  - avalys 4y ago
    What “additional fees on top of replacing the part” are you talking about? I don’t work for KTM, I work in optical R&D. I’ve posted multiple times in the thread because I find the groupthink on this topic ridiculous and I enjoy pointing it out. Do you think prices should be set by parts cost alone? What’s the parts cost of a copy of Halo?
    - tmh88j 4y ago

aitchnyu 4y ago

Never had to ride regularly at 60+ kph, are round mirrors as good as aerodynamic (I assume) rectangular-ish mirrors?

CraigJPerry 4y ago
All mirrors on a motorbike are for admiring your elbows. To be fair, bar end mirrors, triumph style, work well.

6stringmerc 4y ago

Does that mean they agree not to repossess it after 933 miles when I disable payments?

taylodl 4y ago

I have no problem with enabling features after the sale since it has the potential to increase the lifetime of the project. For example, maybe I don't want the quickshifter. When I go to sell the bike maybe the buyer does. They should be able to enable it. Maybe after I buy the bike the whole market has shifted to where everybody wants a quickshifter. Instead of my bike potentially going to the scrap heap it can go to somebody who enables the quickshifting. Maybe over time I see the value of the quickshifter and decide to enable it. I just see this as win-win-win: the manufacturer, the customer, and the 2nd customer all win.

aaronsb 4y ago

Weirdly enough, I see this as a version of the "Scan and bag your own groceries" approach. It's a cost savings measure that hurts the customer and helps the vendor/manufacturer.