3 ms·
Why did they need to pinch the copper tubing shut?
by metadat 4y ago
Why did they need to pinch the copper tubing shut?
- tdeck 4y agoHere's my reading of it as a non-expert. The tubing isn't pinched shut, it's just pinched to restrict the flow. I believe it's to create a bottleneck where pressure can build up between the "hot side" and the "cold side" of the refrigerator. Before the pinch the compressor is driving gas into the pipe, where it meets resistance at the pinch point and compresses to liquid, shedding heat. Then after that point a narrow jet of compressed refrigerant squirts into a lower pressure part of the pipe and starts to evaporate, expanding and taking in thermal energy again. Of course, the refrigerator already has some valve to do this, but the author mentions that it may not be designed for the pressure differential needed for propane, so you can make your own with a pinched tube.
- metadat 4y agoThanks @tdeck, that was my naive guess, too. It seems so imprecise, I assumed it was a bad guess :) cheers bud.
- c_o_n_v_e_x 4y agoTo intentionally create a restriction, an orifice (auth uses the term expansion valve which is incorrect in this scenario). Liquid refrigerant flow is restricted when it flows through the orifice. This causes the pressure to drop which causes the refrigerant to flash/boil. While the refrigerant is flashing/boiling, it is absorbing heat from the surrounding environment.