3 ms·
I had the privilege of running projection for a couple summers at a local theater where I grew up. It really is the best job as long as you don't mind the isola
by shadowgovt 4y ago
I had the privilege of running projection for a couple summers at a local theater where I grew up. It really is the best job as long as you don't mind the isolation and the hurry-up-and-wait parts of it.
What I enjoyed most was the machines themselves. Far from the stereotypical "lens, light, and two vertical reels" image of a projector from the early era of Hollywood, a modern projector is (was, since I'm not a couple decades out of date) a fascinating piece of engineering. Most interesting to me is that the film reels (now massive horizontally-oriented platters, because you need a lot of space to fit one entire Peter Jackson movie) and projector communicate with each other entirely through film tension. On one side is a tension switch that cuts a motor in or out if the film has slack, and on the other side is a W-shuttle: the film is fed back-and-forth between a static and a travelling pulley rack in a W-pattern, and as it grows taut it pulls the travelling rack towards the static rack, which indicates to the payout engine that it has to let out film faster. The end of the film causes the shuttle to drop and a loss of tension on the pickup, which shuts the reels off. Flip a couple switches to reverse directions, re-thread, and show again. It was even possible to cross-thread one film through multiple projectors to show multiple rooms from one stock, though I never had to do that.
Brilliant machines that were clearly the product of a lot of fast "better mousetrap" evolution in an ecosystem of both high competition and a lot of surplus capital.
- teeray 4y ago> It was even possible to cross-thread one film through multiple projectors to show multiple rooms from one stock, though I never had to do that. omg, I always just assumed those mega blockbusters with parallel showings were always just two reels and two projectors. That’s brilliant.
- paulmd 4y agoI wonder if some of these might not always have been "officially licensed" by the studios... afaik studios did licensing by the reel.
- mthursday 4y agoI think it was called "interlinking" and was, at least eventually, official enough to be carried over into the first wave of digital cinema contracts.
- jackvalentine 4y agoIt was called interlocking. At my cinema we could do 4x screens with one print. The leader had to be so bloody long to make it to all the projectors and it was a very risky proposition for things going wrong so we only ever commercially ran 2x screens interlocked. But I did the 4x setup once after hours just to see it in action.
- abracadaniel 4y agoI’m still not entirely clear on the process that caused brainwraps. Ultimately, it was the platter not spinning fast enough to keep up with the rate the film was paying out, but I don’t know why the tension switch wouldn’t have had it keep up. Maybe a switch that required too much tension was constantly getting just a little behind? It was an interesting feedback mechanism to account for the need to constantly change the speed of the platter though. I also recall that some of our platters were a little warped and the movie could start to shift around the platter as it got to the end because you ended up with this large hollow ring of film. Particularly a problem on longer films. Assembling the films was always a fun end to the week. Every Thursday night, new films come in on 8 small reels by courier and you would assemble them onto 2 large reels, and then onto the destination platter. Then you get to watch it as a qa pass and see all of the new releases in your own private midnight showing. A nearby theater neglected to do this with the premier of Titanic and and ended up with the last half of the movie backwards and upside down on the first showing as I recall. Here’s a video of the platter system running for those having trouble picturing it: https://youtu.be/bETnkNYuFVg https://youtu.be/bETnkNYuFVg
- latchkey 4y agoAlso cool watching the full threading: https://www.youtube.com/watch?v=pAOMhws06y4 https://www.youtube.com/watch?v=pAOMhws06y4