2 ms·
"SeeMeCNC - uses software to drive stepper drivers via a parallel port" Parallel port? Isn't that an anachronism, or are these still popular in the 'hobby' wor
by Someone 15y ago
"SeeMeCNC - uses software to drive stepper drivers via a parallel port"
Parallel port? Isn't that an anachronism, or are these still popular in the 'hobby' world?
- gregsadetsky 15y agoThey're popular in the CNC world, yes. For instance, the recently Kickstarter-funded MyDIYCNC project also natively interfaces through the parallel port; Stephen McGloughlin, who's behind the project, is building an USB interface for it from scratch. The main issue seems to be the timing with controlling... parallel i/o lines. From http://www.cnccookbook.com/CCBreakoutBoards.htm http://www.cnccookbook.com/CCBreakoutBoards.htm : While there are boards the purport to simulate a parallel port with a USB connection, most of them don't work for CNC applications. The reason is that they are not high enough performance to maintain the exact timing relationships needed to produce a clean pulse train to control multiple servos or steppers.
- _delirium 15y agoThey're nice for hobbyists because they bridge the digital<->voltage domains really easily, so you can just hook up wires to the pins and feed them into whatever you're building, rather than having to use a fancier microcontroller interface. But yeah it's getting to be more of a hassle that e.g. a typical laptop won't have one anymore. In the past I've also used audio line-in/out as a simple two-channel (each way) I/O interface, but that runs into more problems with drivers getting in your way (buffering things and whatnot) than parallel ports do.