6 ms·
Researcher finds a new method for recycling polystyrene
- ParksNet 4y agoWhy don't we just burn all these plastics in waste2energy plants? Even with perfect recycling, the limitation seems to be on collection and separation.
- ezconnect 4y agoThat's the solution of the Japanese, and they are very efficient on it, burn them and turn them to electricity and the extra waste get used as land fills.
- kzrdude 4y agoAlso Sweden burns a lot of waste (landfills for household waste are entirely obsolete). Rest heat is used for domestic heating.
- shagie 4y agoCombustion products. https://en.wikipedia.org/wiki/Polystyrene#Incineration https://en.wikipedia.org/wiki/Polystyrene#Incineration > If polystyrene is properly incinerated at high temperatures (up to 1000 °C) and with plenty of air (14 m3/kg), the chemicals generated are water, carbon dioxide, and possibly small amounts of residual halogen-compounds from flame-retardants. > When polystyrene was burned at temperatures of 800–900 °C (the typical range of a modern incinerator), the products of combustion consisted of "a complex mixture of polycyclic aromatic hydrocarbons (PAHs) from alkyl benzenes to benzoperylene. Over 90 different compounds were identified in combustion effluents from polystyrene." The American National Bureau of Standards Center for Fire Research found 57 chemical by-products released during the combustion of expanded polystyrene (EPS) foam. Yes, you can burn it... but the things you make out of it unless you are really trying to burn it (and then its a burn it to dispose of it rather than get energy from it) leave some less than desirable compounds.
- orangepurple 4y agoYeah there may be awful byproducts at burn temperatures required for optimal power generation but if they can be captured/condensed/solidified they can be collected as solid waste and buried.
- KennyBlanken 4y agoYeah, let's just bury those toxic cancer-causing compounds! What could possibly go wrong? looks over at the 1300 superfund sites around the nation
- shagie 4y agoThe energy to condense out and capture the undesirable products becomes comparable to the energy capture it. Japan's approach isn't because they need energy but rather that they are trying to minimize landfill (as its an island and space is at a premium). The resulting products are carcinogenic toxic waste - which comes with additional challenges for disposal. In the US, it is likely more desirable to bury the inert polystyrene rather than trying to deal with the PAHs ( https://en.wikipedia.org/wiki/Polycyclic_aromatic_hydrocarbon https://en.wikipedia.org/wiki/Polycyclic_aromatic_hydrocarbo... ) and other byproducts. The article is describing a process where UV light and a catalyst break down/transform polystyrene into diphenylmethane ( https://en.wikipedia.org/wiki/Diphenylmethane https://en.wikipedia.org/wiki/Diphenylmethane ) which is a feed stock for many other (useful) processes. The paper referenced in the article is Cascade degradation and upcycling of polystyrene waste to high-value chemicals https://www.pnas.org/doi/10.1073/pnas.2203346119 https://www.pnas.org/doi/10.1073/pnas.2203346119
- noselasd 4y agoIs there currently a bottleneck that prevents burning it at 1000°C and getting energy out of it ? Sounds like business opportunities ! Make an practical incinerator ?
- loudmax 4y agoWouldn't it be better to bury plastic in landfills? Keep the stuff out of the ocean, but I don't understand the harm in landfills. Put that carbon back in the ground where it came from.
- KennyBlanken 4y agoPlastics recycling is a sham, invented by the plastic industries to defuse criticism for an explosion in single-use packaging. The vast majority of plastics are never recycled and end up in landfills or dumped at sea. It's not economical to recycle plastics because separating plastics is expensive, the percentage of material that has to be chucked because of contamination (food, chemicals, labels, etc) and the recovered material itself has little to no value due to degradation of the polymers. Methods like these are important, but what's more important is replacing, reducing, etc.
- and-not-drew 4y agoNot disagreeing, but do you have a source? I'd like to know more about this.
- aaaaaaaaaaab 4y ago"Plastic recycling sits quite low in the waste hierarchy as a means of reducing plastic waste. It has been advocated since the early 1970s,[11] but due to severe economic and technical challenges, did not impact plastic waste to any significant extent until the late 1980s. The plastics industry has been criticised for lobbying for the expansion of recycling programs, even while industry research showed that most plastic could not be economically recycled and simultaneously increasing the amount of virgin plastic, or plastic that has not been recycled, being produced." https://en.m.wikipedia.org/wiki/Plastic_recycling https://en.m.wikipedia.org/wiki/Plastic_recycling
- xxs 4y agoIt's pretty much a well known fact. Recycling is extra hard due to the need to separate the plastics and then the molding new plastics requires specific type of plastic molecule. Many plastics are even blends, e.g. ABS + PC, or glass fiber filled ones. "Plastics" are just so many types, different in all kinds of ways. So separating them and using them in anything sensible doesn't happen often at all.
- algo_trader 4y agoI was just reading about TheOceanCleanup [1] and its depressing. It is hard to collect the garbage, it cant be disposed off, and there is a huge ongoing flow of new garbage. Can we at least recycle plastics into other low-quality plastic which can be degraded/mix-quality/blended or something? I am not an expert. [1] https://theoceancleanup.com/ https://theoceancleanup.com/
- mackal 4y agoSomeday I'll have something to do with my Warhammer sprues I guess
- MassPikeMike 4y agoBurning plastics isn't great because of all the awful combustion products. Plasma gasification sounds like a good alternative. The molecular bonds in the plastics are broken and you end up with mostly carbon monoxide plus hydrogen gas, itself a nice fuel source. Metals and other heavy elements are typically allowed to settle into some molten glass to keep them contained. A publicly traded company called StarTech trying to do this was getting lots of publicity as recently as 2007 (https://www.popsci.com/scitech/article/2007-03/prophet-garbage/ https://www.popsci.com/scitech/article/2007-03/prophet-garba...) but went bankrupt in 2013 after the death of its founder, Joseph Longo (https://www.ctpost.com/news/article/Wilton-s-environmental-darling-Startech-on-the-4158575.php https://www.ctpost.com/news/article/Wilton-s-environmental-d...). A company called InEnTec claims to have the technology deployed in a few places (https://inentec.com/pem-technology/deployed-pem-technology/ https://inentec.com/pem-technology/deployed-pem-technology/) but overall one doesn't hear much about this possibility. I wonder why not.
- rapjr9 4y agoI talked to the owner of a local waste management company about plasma gasification. He was aware of the technology and said it cost too much for him to use. He'd have to be taking in trash from five New England states to have enough volume to keep the machine fed and make it cost effective. Sounded like an opportunity to me, but it seemed too risky to him. I'm not sure why he thought the technology could not scale down to the size of his operation, though I have read that it is something you want to keep going continuously, otherwise it costs a lot (in electricity or fossil fuel) to build up enough heat to start the process. Maybe it requires a minimum thermal mass to be self sustaining?
- proee 4y agoWhy don't we promote more single-use aluminum containers? Are aluminum cans considered a success in terms of recycling and not going into the landfill? Why don't we have aluminum yogurt containers, aluminum milk cartons, etc? Has the 5-cent deposit program by some states been a success? If so, this seems like a good solution for more products than just beverages. Aluminum seems like a really cool material for packaging. One obvious downside though is that aluminum is not clear.
- eatbitseveryday 4y agoAgreed, though some folks will remind us that alu cans are lined with plastic (which is more a health argument than recycling), but similar to paper cartons, that may need to be stripped prior to recycling.
- eptcyka 4y agoAluminum is no panacea - its expensive to mine both ecologically and energy wise, and its energy intensive to recycle. I'd be more interested in reusable containers.
- shagie 4y agohttps://recycling.world-aluminium.org/review/sustainability/ https://recycling.world-aluminium.org/review/sustainability/ https://citizensustainable.com/recycling-aluminum/ https://citizensustainable.com/recycling-aluminum/ https://www.treehugger.com/the-benefits-of-aluminum-recycling-1204138 https://www.treehugger.com/the-benefits-of-aluminum-recyclin... From the last link: > Recycling aluminum saves 90% to 95% of the energy needed to make aluminum from bauxite ore. It doesn't matter if you're making aluminum cans, roof gutters or cookware, it is simply much more energy-efficient to recycle existing aluminum to create the aluminum needed for new products than it is to make aluminum from virgin natural resources. > So how much energy are we talking about here? Recycling one pound of aluminum (33 cans) saves about 7 kilowatt-hours (kWh) of electricity. With the energy it takes to make just one new aluminum can from bauxite ore, you can make 20 recycled aluminum cans. > Putting the energy question into even more down-to-earth terms, the energy saved by recycling one aluminum can is enough to power a television set for three hours. Aluminum is extremely recyclable and energy efficient at doing it. Estimates put it at 75% of all aluminum that has ever been created is still in circulation having been recycled because it is so easy to do it. https://archive.epa.gov/epawaste/conserve/smm/wastewise/web/html/factoid.html https://archive.epa.gov/epawaste/conserve/smm/wastewise/web/... > Aluminum can be recycled using less than 5 percent of the energy used to make the original product. https://en.wikipedia.org/wiki/Aluminium_recycling https://en.wikipedia.org/wiki/Aluminium_recycling > Recycling aluminium uses about 5% of the energy required to create aluminium from bauxite; the amount of energy required to convert aluminium oxide into aluminium can be vividly seen when the process is reversed during the combustion of thermite or ammonium perchlorate composite propellant. > Aluminium die extrusion is a specific way of getting reusable material from aluminium scraps but does not require a large energy output of a melting process. In 2003, half of the products manufactured with aluminium were sourced from recycled aluminium material. That wouldn't be the case if it was intensive to recycle.
- lsllc 4y agoEven with this development in recycling, Styrofoam should just be banned for packaging. Aside from disposal, it's very brittle and you end up opening a box only to find smashed up Styrofoam that now escapes all over the house/outside/car which is nearly impossible to clean up adding yet more micro plastics to the environment. There's nothing wrong with using formed cardboard packing instead of styrofoam and it can be recycled again, or at least if it ends up in a landfill, it'll biodegrade instead of still being there at the eventual heat death of the universe.
- HappySweeney 4y agoThey got mealworms to eat styrofoam, so that stuff will likely be everywhere soon as the "environmental" container material.
- Apocryphon 4y agoDoesn't that mean microplastics will end up in the food chain from the animals that eat mealworms
- shagie 4y agoNope - its digested (chemically processed). https://www.sciencedaily.com/releases/2020/05/200527105055.htm https://www.sciencedaily.com/releases/2020/05/200527105055.h... > The team placed 50 superworms in a chamber with polystyrene as their only carbon source, and after 21 days, the worms had consumed about 70% of the plastic. The researchers then isolated a strain of Pseudomonas aeruginosa bacteria from the gut of the worms and showed that it that could grow directly on the surface of polystyrene and break it down. Finally, they identified an enzyme from the bacteria, called serine hydrolase, that appeared to be responsible for most of the biodegradation. This enzyme, or the bacteria that produce it, could someday be used to help break down waste polystyrene, the researchers say. It is decomposed into simpler components that can be used by the bacteria itself for energy. https://en.wikipedia.org/wiki/Serine_hydrolase https://en.wikipedia.org/wiki/Serine_hydrolase
- theplumber 4y agoThe best form of recycling is not producing it in the first place. Less plastic produced = less harm. It's no longer an unanswered questionx
- CatWChainsaw 4y ago[flagged]
- einpoklum 4y agoUp until the last word of the title I was sure it was going to say: "Virginia Tech researcher finds a new method for recycling papers" :-P
- Silverback_VII 4y agoWould be very nice to have many worms and bacteria who start to eat away the synthetic garbage. However, the will als start to eat solar panels and your shoes. But I'm still very much for the engineering of such creatures.
- ryanmarsh 4y agoI have a way of recycling polystyrene that’s also good for dealing with tyrants.