3 ms·
> I've come across multiple examples of chabuduo resulting in lower quality at zero cost savings. A good example is the construction of a shower. It doesn't cos
by lelanthran 4y ago
> I've come across multiple examples of chabuduo resulting in lower quality at zero cost savings. A good example is the construction of a shower. It doesn't cost anything more to make sure the floor is sloped towards the drain. But it often isn't.
It actually does cost more, because it takes slightly more time.
Making the floor level means you can simply use a 2m long aluminium square tube[1] or similar makeshift tool when floating/finishing the bare floor (before tiles are put on) and simply sweep it across, and depending on the resin/concrete you are using, it might even self-level[2]. To make level-ish floors there's plenty of tools and plenty of quick methods.
To make a floor with a particular lowest-point takes more work because now you have a large curve to create in the floor and no simple tool that you can sweep across in a few attempts.
[1] I use the tube because it's light and easy to manhandle over the entire floor.
[2] When I needed a level floor in a room (pulled out the carpeting and the floor was too uneven for laminated wood), it took only 15m to pour the self-leveling resin in, sweep it over, and leave it overnight. When I built a shower floor, it took me about five hours from start to finish with a concrete mix to get an acceptable curve in the floor. Of course, it was the only time that I attempt to put a floor in a shower, so I may have spent more time getting it right than was necessary.
- refurb 4y agoYou’re overthinking it. The drain is at the right level. The wall is at a higher level. A piece of wood to roughly make sure it’s an straight line would get you 90% of the way there. They don’t even do that.
- lelanthran 4y ago> You’re overthinking it. I probably was; it was the first time I was doing that and I didn't want to have to redo it.