9 ms·
TSMC Completes Construction of 5nm Fab 21 in Arizona
- phendrenad2 4y agoCompleted construction, unless you count all the equipment installation that will last until 2024.
- msbarnett 4y ago* Completes construction of the building shell. Next step is all of the electrical, sewage, HVAC and related infrastructure to build the clean rooms inside, and then only once that is done, start bringing in fab equipment. So it’s quite a ways away from being operational.
- cronix 4y agoPlus once it's "operational," it takes like a year or so to work out the kinks to get a decent yield of working chips.
- habibur 4y agoOnly the building. No machine, equipment or anything inside yet.
- sylware 4y ago5nm while 2/3nm is about roll? Probably for mid-range chips I guess.
- tintor 4y ago5nm is still the bleeding edge, and chip fab machines can be replaced.
- ip26 4y agoIt won’t be by the time the fab is up and running. Of course, I find that easy to forgive- when booting up a completely new locale, start with what you know.
- ElectricalUnion 4y agoIt will also be comming online on a wave of excess silicon capacity fuelled by the then-current silicon drought. On a possibly drier climate, competing for water resources.
- sylware 4y agoyeah, I implied mid-rand chips when the foundry will actually be in production run, namely in years, or when the 2/3nm chips will really be rolling.
- nobodyminus 4y ago5nm is too small for a fab. No one is going to be able to fit inside. It needs to be at least 3x that size.
- lostmsu 4y agoWait until they make 1nm robots.
- CoastalCoder 4y agoHuh? 5 nautical miles should be plenty. I'm more concerned that it's a 1d building.
- hinoki 4y ago1d? That’s really cheap, just one pence! I’m sure it cost more than that.
- deleted 4y ago[deleted]
- rvbissell 4y agoWhat is this, a fab for ants?
- stackbutterflow 4y agoMakes me think that every HN thread should have one sub thread for the jokes.
- colechristensen 4y ago*Placed the last beam in the building. Terribly far from the kind of "complete" which would be relevant news here.
- throwaway81523 4y agoAs long as the supposed topic of this thread (TSMC put up a building, but so far it has no fab equipment inside) is so irrelevant, can I ask something off topic but slightly related? SMIC is supposedly shipping 7nm chips now. There was a big national security thing to prevent SMIC from getting access to ASML EUV steppers. Does their 7nm process mean they now have made their own EUV gear? Or did they get ASML steppers after all? It seemed weird for such a critical technology to stay single sourced from just one company for so many years.
- wmf 4y ago7 nm doesn't require EUV and SMIC is not using EUV.
- richk449 4y agoI assume they are doing some crazy number of patterns to get to that feature size: http://www.monolithic3d.com/blog/the-quad-patterning-era-begins http://www.monolithic3d.com/blog/the-quad-patterning-era-beg... But I’m curious if someone knows the details.
- sudosysgen 4y agoThis is correct, there is an article (I think on the semianalysis) that summarises the process - they are using multi-patterning as TSMC did with their N7 7nm process. The real shocker is that they've been pumping out 7nm commercially since at least a year, which is a feat that most thought was still a ways ahead. It means that they are far more capable than previously thought.
- nebula8804 4y ago>The real shocker is that they've been pumping out 7nm commercially since at least a year, which is a feat that most thought was still a ways ahead. It means that they are far more capable than previously thought. This seems like a real failure in intelligence gathering. How do you think this happened?
- guai888 4y agoAll the machines have been pre assembled and tested in Taiwan. The installation should go faster than anticipated. They try to minimize labor cost in the US. Salary and overtime pay are much lower in Taiwan so they try to use the engineering resource in Taiwan as much as possible.
- hedora 4y agoAs happy as I am to see some sort of manufacturing in the US, I really hope they get their water cut off. Maybe they'll think twice about building the next one in the middle of a frigging desert during a regional mega drought. https://www.theverge.com/22628925/water-semiconductor-shortage-arizona-drought https://www.theverge.com/22628925/water-semiconductor-shorta...
- kortilla 4y agoThis is short-sited hysterical nonsense. It is much better to build a fab there than to grow food there. There is nowhere near a crisis level of water shortage in the Colorado river basin. It’s still well within the planned tiers of the Colorado river compact. AZ’s cut is on par with CA’s. Maybe you’re thinking of NV? A fab uses significantly less water than a farm, can benefit much better from solar, and should be placed in a place like that receives effectively no natural disasters. About the dumbest place to put this would be somewhere on the San Andreas fault or cascadia subduction zone. AZ, NV, and NM are some of the best places for anything expensive that needs stability environmentally.
- hedora 4y agoOne fab uses 10-50k homes worth of water, and this new fab is fed by the Colorado, per the article I linked. The reservoirs are at all time lows, and weather projections say the compact will hit the 'automatically cancel this agreement and enter emergency renegotiation phase' in a few years. I suppose that is a planned tier.
- lizardactivist 4y agoI wonder if this will lead to them losing their edge and lead in manufacturing state of the art chips to the various American manufacturers. Also, did they take this initiative themselves, goaded into it, or even coerced? I recall reading recently how the US started making demands to foreign semi manufacturers to get details of manufacturing processes, supply chains, customer bases etc. Investments like these will overwhelmingly favor the US in the long run.
- nebula8804 4y agoFrom an American POV: who cares? The country's citizens have terrible health care, no real safety net, rising inflation forcing people to eat more and more processed junk, half the population has collapsed (negative growth, drugged up with painkillers etc.) and a cause of this is spending a notable chunk of the national budget on the military which defends places like Taiwan instead of solutions that improve the problems above. If America says "JUMP" TSMC says how high.
- mark_l_watson 4y agoI drove past this on the 303 Phoenix bypass a few weeks ago. I figured out immediately what it was, no signs required. Great for Arizona! Great to manufacture more chips in the US. I don’t expect global supply chains to continue to exist in their current form when the US loses reserve currency status and paying for the US Navy to ensure the safety of global ship traffic ceases. As a US tax payer, it infuriates me to have military bases in so many countries, but on the other hand our Navy has clear value, at least in my opinion.