3 ms·
Foil backing is normally used on polyurethane foams, and is necessary to give the panel sufficient structural rigidity during manufacture. One could use a plas
by londons_explore 4y ago
Foil backing is normally used on polyurethane foams, and is necessary to give the panel sufficient structural rigidity during manufacture.
One could use a plastic film instead though, or even corrugated cardboard.
The effectiveness of the film for insulation depends on many things.
Energy is lost through radiation, conduction and convection. At every layer of a house wall, the contribution of those effects varies widely.
Within the panel, radiation has near zero impact, because the foam material is directly in contact with the foil.
Outside the panel, the foil might have a benefit. The benefit would be maximized if there was a multi-millimeter air gap, followed by a very hot surface (Radiation doesn't scale linearly with temperature).
The foil also has a downside for insulatitive properties... The aluminium the foil is made out of conducts heat very well.
That means if part of the wall is leaking some heat (for example has a nail through it), then the foil will spread that head sideways through the wall, increasing overall losses, sometimes dramatically.