3 ms·
> The battery ... is made of at least one cell ... consisting of three inks printed onto a rectangular strip of paper. Sodium chloride salt is dispersed through
by mdp2021 4y ago
> The battery ... is made of at least one cell ... consisting of three inks printed onto a rectangular strip of paper. Sodium chloride salt is dispersed throughout the strip of paper and one of its shorter ends has been dipped in wax. An ink containing graphite flakes, which acts as the ... cathode, is printed onto one of the flat sides of the paper while an ink containing zinc powder, which acts as the ... anode, is printed onto the reverse side of the paper. Additionally, an ink containing graphite flakes and carbon black is printed on both sides of the paper, on top of the other two inks[: t]his ink connects the positive and negative ends of the battery to two wires, which are located at the wax-dipped end of the paper. // When a small amount of water is added, the salts within the paper dissolve and charged ions are released
The cell seems to be able to provide between around 0.5v and 1.2v, needing a few drops of water.
Article at "Nature - Scientific Reports":
https://www.nature.com/articles/s41598-022-15900-5 https://www.nature.com/articles/s41598-022-15900-5
> We developed a disposable paper battery aiming to reduce the environmental impact of single-use electronics for applications such as point of care diagnosis, smart packaging and environmental sensing. The battery uses Zinc as a biodegradable metal anode, graphite as a nontoxic cathode material and paper as a biodegradable substrate. To facilitate additive manufacturing, we developed electrodes and current collector inks that can be stencil printed on paper to create water-activated batteries of arbitrary shape and size. The battery remains inactive until water is provided and absorbed by the paper substrate, taking advantage of its natural wicking behavior. Once activated, a single cell provides an open circuit potential of 1.2 V and a peak power density of 150 µW/cm2 at 0.5 mA. As a proof of concept, we fabricated a two cell battery and used it to power an alarm clock and its liquid crystal display