3 ms·
just curious: would these machines have non-rotational media only ?
by signa11 15y ago
just curious: would these machines have non-rotational media only ?
- jemka 15y agoIt's in the FAQ.
- fuzzix 15y ago"hard drive sealing system" - I'm pretty sure you can't completely seal a disk, it needs some surrounding air to deal with pressure changes and such. Wonder if they can control the pressure to the point you can seal it... or if the seal itself incorporates an air flow system. How complex can this sealing system be while still allowing the disks to fit in the bays?
- ajross 15y agoI'm all but certain disks are sealed. If air has a path to the platters then so does dust.
- StavrosK 15y agoAir molecules are not dust-sized.
- onemoreact 15y agoYou can use a bladder to quickly equalize air pressure without exchanging air. (Air will slowly penetrate most bladders, but it's not fast enough for rapid pressure changes.) Some heaters use a similar approach to limit corrosion. http://www.westank.com/bladder-tanks.php http://www.westank.com/bladder-tanks.php
- StavrosK 15y agoThat's what I was thinking too, and the pressure changes shouldn't be so drastic that the bladder would burst.
- jemka 15y agoPure speculation: The hole is for, as you said, pressure differences. The head uses air pressure to float above the platter. Changes in pressure could bring the head closer/farther away from the platter which could have unwanted consequences. Pressure fluctuations are due in part to changes in temperature. Since the temperature is regulated by the oil, and that temperature will change more slowly than with air, plugging the hole is relatively safe.
- pavel_lishin 15y agoI imagine that the hard drives themselves wouldn't be filled with the oil - perhaps wrapped in a heat-conducting plastic beforehand, or maybe drives are stored outside of oil altogether. Does anyone have any statistics on what contributes the most heat? I'm assuming power supply and processor/GPU are the worst offenders. Edit: yup, the drives are wrapped: > First, our technicians remove server fans and put them aside for future use or reverse-modification at a later date. Then, each hard drive is encapsulated using GRC’s proprietary hard drive sealing system. Finally, the CPU thermal grease is replaced with a non-soluble foil.
- deleted 15y ago[deleted]
- devy 15y agoSSDs in server farms are the way to go anyway.
- signa11 15y agothe price-points for the two are way off the scale e.g. on newegg, a 120gb ssd is expensive than 1tb 7200rpm sata..
- jolan 15y agoBut you get tens of thousands IOPS instead of hundreds
- nknight 15y agoWhich may be important, or may be utterly worthless. It's like "total cost of ownership" FUD, numbers are useless outside their original context, and everybody has a different context.
- misterbwong 15y agoThis. For many high perf applications, anything outside of RAM (yes, even with SSD's) is a no-no.
- DEinspanjer 15y agoWow.. really? Is this a trend with any documentation? Seems to me that there are still a lot of mentions of SSD failures floating around the tubes, and that plus the significant cost for large scale storage over traditional platters would make it a very tough sell to any organization wanting to deploy large quantities of servers.
- boredguy8 15y agoMechanical disk supply chains are increasing platter drive costs significantly while at the same time improvements in reliability and cost for SSDs are bringing costs lower. And yes, there have been large deployments: http://www.computerworld.com/s/article/9218811/EBay_attacks_server_virtualization_with_100TB_of_SSD_storage http://www.computerworld.com/s/article/9218811/EBay_attacks_...