3 ms·
I wonder what's good for making holes in plastic? I've had bad luck using drills since it can melt the plastic and gunk up the bit.
by skybrian 4y ago
I wonder what's good for making holes in plastic? I've had bad luck using drills since it can melt the plastic and gunk up the bit.
- bombcar 4y agoOften for weird materials you either need really low speed or really high speed. https://ruko.shop/blogs/ruko-shop-blog/which-drill-bits-to-use-for-plastic https://ruko.shop/blogs/ruko-shop-blog/which-drill-bits-to-u...
- TheRealWatson 4y agoWhich type of drill bits you tried? There are drill bits made specifically for plastics.
- analog31 4y agoI have had great results with a Unibit... as in, 1000's of holes for a small gadget that I make for my side business. They have zero rake angle, so they don't pull through thin sheet material. Keep them as sharp as possible to minimize heating. The bit that I use for plastic isn't allowed to touch metal. If coolant is needed, plain water works just fine. Some oils will craze plastic. Brad point bits also work well. If you're not doing production work, just be patient and proceed slowly to avoid heat buildup.