4 ms·
Where do you plan to keep the machine? Is noise a concern? If you plan to spend a lot time around it, then I suggest getting some kind of tower. Otherwise ra
by metadat 4y ago
Where do you plan to keep the machine? Is noise a concern?
If you plan to spend a lot time around it, then I suggest getting some kind of tower. Otherwise rackmount all the way. There are so many benefits to rack machines, here are a few:
* Superior cooling
* Enterprise reliability
* Built-in remote access system (so you can remotely cycle the power in the rare event of a hang)
* Easy to open up and work on
* Tons of HDD slots
Downsides: Rackmount machines tend to be varying degrees of insanely loud.
Is 2U a hard limit on the size?
I love me a Supermicro rackmount. They are the most cost-effective good quality servers that I know of. Overall quite reliable, easy to work with, easy to source replacement parts for in the rare case a component croaks.
GPU lines:
https://www.supermicro.com/en/products/gpu?pro=pl_grp_type%3D5 https://www.supermicro.com/en/products/gpu?pro=pl_grp_type%3...
Please follow up and let us know what you end up getting!
Off topic: Are FatTwins still the big kahunas of high-performance, cost-effective enterprise rackmount servers?
Final food for thought: HN has a lower concentration of hardware nerds than the homelab subreddit. You might like to ask there as well, you'll get better advice.
https://old.reddit.com/r/homelab/ https://old.reddit.com/r/homelab/
- uniqueuid 4y agoThanks, I had never seen FatTwins so far. Looks like the chassis wants to run on 8 nodes fully equipped - I think that's outside my budget and would have me manage 8 separate systems. I'm looking for a single beefy system to skip the management and ops overhead. But it looks like there are few chassis with space and thermal capacity for a 300W GPU AND many 3.5" slots at the same time.
- metadat 4y agoYeah, I only mention the FatTwins as they are ridiculous. Don't know if they can even house GPU compute. The 4U supermicro GPU chassis looks pretty good, and accepts up to 8+TB ram. Something like: https://www.supermicro.com/en/Aplus/system/4U/4124/AS-4124GS-TNR.cfm https://www.supermicro.com/en/Aplus/system/4U/4124/AS-4124GS... https://www.supermicro.com/en/products/motherboard/H12DGO-6 https://www.supermicro.com/en/products/motherboard/H12DGO-6 (2x nvme m.2) Though I usually like to have some regular PCIx slots so I can attach independent SATA HBAs.
- uniqueuid 4y agoRegarding the follow-up, I can at least tell you my current candidate pick: The Lenovo P620 has new Threadripper Pros with their high single-core performance, can take ordinary (i.e. non-blower-style active) GPUs, take 2 PCIe4 NVME ssds plus ~8 PICe3 SSDs via lane splitting and have space for ~4-5 HDDs. Putting one of these in a rackmount kit would be a pretty good choice balancing performance. Plus I can liberally use regular hardware that's not gold-plated. This should open some cheap upgrade options in the future, i.e. a new Hopper GPU. The only downsides are (1) RAM limitations (although the max capacity is 1TB with the new 128GB RDIMMS) and (2) power, since it only has a 1000W PSU.
- CobaltFire 4y agoI posted a top level comment on my experience with the P620; please take a look.
- kjs3 4y agoI would second the recommendation for Supermicro. I've had good success with many of them over the years. Good price, above average reliability, very wide range of options, decent post-sale support.
- Dracophoenix 4y agoAlso consider: https://www.reddit.com/r/HomeDataCenter/ https://www.reddit.com/r/HomeDataCenter/