PCB manufacturers accept a format called "Gerber" files. They are basically drawings of all the layers of the PCB. You can download the Gerber files from the Ki

PCB manufacturers accept a format called "Gerber" files. They are basically drawings of all the layers of the PCB. You can download the Gerber files from the Kitspace page and send/upload them to a manufacturer of choice or even use one of the links to auto-upload them for you to Aisler, OSHPark, PCBWay or JLCPB. Since the PCB is the board only, component information is actually not required to manufacture it. If you want a functioning device however you do have to source the components (e.g. from Digikey) and solder them to the PCB. I would recommend starting with an easier circuit (the electron-detector above might be a good candidate!) and ideally find someone to teach and help you (maybe at a local hackerspace? youtube tutorials might get you there if not?) There's also this popular comic for teaching soldering to beginners that might help: https://mightyohm.com/blog/2011/04/soldering-is-easy-comic-book/ https://mightyohm.com/blog/2011/04/soldering-is-easy-comic-b.... More links like this can be found on our list: https://github.com/kitspace/awesome-electronics/ https://github.com/kitspace/awesome-electronics/ The other option is to have a manufacturer solder it for you (e.g. Aisler and JLCPCB will do this for you), but if you have no experience building and debugging electronics I wouldn't recommend it (since it can get expensive and you can easily end up with a non-functioning device).