3 ms·
I have a tangential question: > "The process is 100% selective—meaning there is no undesirable by-product—comparable with methane monooxygenase, which is the e
by thaumasiotes 4y ago
I have a tangential question:
> "The process is 100% selective—meaning there is no undesirable by-product—comparable with methane monooxygenase, which is the enzyme in nature for this process."
It seems like it should be pretty easy to get any given enzyme mass-produced. What is the reason we're not just growing a bunch of methane monooxygenase and using it to convert methane?
- Gordonjcp 4y ago> What is the reason we're not just growing a bunch of methane monooxygenase and using it to convert methane? Probably the same as every other eco-friendly "get rich quick" scheme - the precursors are relentlessly unpleasant. "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..."
- MarcoZavala 4y ago
- thaumasiotes 4y ago> "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..." It seems like a safe bet that production and use of an organic protein are best accomplished at temperature ranges normally maintained by whatever life forms naturally produce it.
- Gordonjcp 4y agoYeah, but this is what the workup always seems to read like :-)
- Akronymus 4y ago> "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..." That makes me think of this quote: "The heater was warmed to approximately 700C. The heater block glowed a dull red color, observable with room lights turned off. The ballast tank was filled to 300 torr with oxygen, and fluorine was added until the total pressure was 901 torr. . ." from: https://www.science.org/content/blog-post/things-i-won-t-work-dioxygen-difluoride https://www.science.org/content/blog-post/things-i-won-t-wor...
- less_less 4y agoEven if you can mass-produce an enzyme and its necessary cofactors, it might not be easy to use it in an industrial setting. Some enzymes need a very particular environment to be stable (pH, temperature, salinity etc) or can be destroyed by side-reactions with other things in your tank. Some work only when bound to particular cellular components (e.g. the cell membrane). If they need energy to work then it's probably as ATP or NADPH, so you'd have to somehow supply that in your bioreactor. And of course you have to keep the whole tank sterile without damaging the enzyme. These problems notably plague attempts to use the even-holier grail of nitrogenases, basically enzymes for synthesizing ammonia using N2 and water. The current standard process for industrially fixing nitrogen (the Haber-Bosch process) is energy-inefficient and uses about 1-2% of the world's total energy supply, mostly in the form of natural gas. So significantly reducing its energy usage would be a huge deal, but we haven't been able to do it, nor do we fully understand how nitrogenases even work. You could also try to culture bacteria that do the whole process and maintain the enzymes for you. In the case of methanol synthesis though, even if you could do this you'd have to keep tes culture alive and working 24/7 at a remote industrial site. A flare stack is a lot simpler.