5 ms·
Apparently the technique works at close to standard temperature and pressure. Considering that the Sabatier process can be run off water and electricity, and de
by dotancohen 4y ago
Apparently the technique works at close to standard temperature and pressure. Considering that the Sabatier process can be run off water and electricity, and desalination can be done with sunlight, we have all the puzzle pieces for converting seawater to methanol via solar power. The chemical byproduct is oxygen, itself very a very useful element though difficult to compress and store. Even if the byproduct O2 is released to the atmosphere this looks very promising.
- thaumasiotes 4y agoI have a tangential question: > "The process is 100% selective—meaning there is no undesirable by-product—comparable with methane monooxygenase, which is the enzyme in nature for this process." It seems like it should be pretty easy to get any given enzyme mass-produced. What is the reason we're not just growing a bunch of methane monooxygenase and using it to convert methane?
- Gordonjcp 4y ago> What is the reason we're not just growing a bunch of methane monooxygenase and using it to convert methane? Probably the same as every other eco-friendly "get rich quick" scheme - the precursors are relentlessly unpleasant. "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..."
- MarcoZavala 4y ago
- thaumasiotes 4y ago> "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..." It seems like a safe bet that production and use of an organic protein are best accomplished at temperature ranges normally maintained by whatever life forms naturally produce it.
- Gordonjcp 4y agoYeah, but this is what the workup always seems to read like :-)
- Akronymus 4y ago> "So all you need to do is take your water and yeast and cellulose and put it into a container, then slowly add the uranobenzene and methylated lead, bubble some nickel carbonyl through it, and gently warm it up to 900°C..." That makes me think of this quote: "The heater was warmed to approximately 700C. The heater block glowed a dull red color, observable with room lights turned off. The ballast tank was filled to 300 torr with oxygen, and fluorine was added until the total pressure was 901 torr. . ." from: https://www.science.org/content/blog-post/things-i-won-t-work-dioxygen-difluoride https://www.science.org/content/blog-post/things-i-won-t-wor...
- less_less 4y agoEven if you can mass-produce an enzyme and its necessary cofactors, it might not be easy to use it in an industrial setting. Some enzymes need a very particular environment to be stable (pH, temperature, salinity etc) or can be destroyed by side-reactions with other things in your tank. Some work only when bound to particular cellular components (e.g. the cell membrane). If they need energy to work then it's probably as ATP or NADPH, so you'd have to somehow supply that in your bioreactor. And of course you have to keep the whole tank sterile without damaging the enzyme. These problems notably plague attempts to use the even-holier grail of nitrogenases, basically enzymes for synthesizing ammonia using N2 and water. The current standard process for industrially fixing nitrogen (the Haber-Bosch process) is energy-inefficient and uses about 1-2% of the world's total energy supply, mostly in the form of natural gas. So significantly reducing its energy usage would be a huge deal, but we haven't been able to do it, nor do we fully understand how nitrogenases even work. You could also try to culture bacteria that do the whole process and maintain the enzymes for you. In the case of methanol synthesis though, even if you could do this you'd have to keep tes culture alive and working 24/7 at a remote industrial site. A flare stack is a lot simpler.
- bongobingo1 4y agoAre we likely to discover in (* x 10) years that an over saturation of O2 in the atmosphere is damaging in some kind of way, on a global scale? AFAIK breathing pure O (or O2? Not a chemist) isn't great for your health?
- abirch 4y agoMedical oxygen tanks are over 85%. That said everything would be more flammable.
- rileyphone 4y agoSuch a high level makes the terrifyingly large insects of the dinosaur era possible again
- ChrisMarshallNY 4y agoHere's a funny posting by the Terminix (bug spray) folks: https://www.terminix.com/blog/bug-facts/giant-prehistoric-bugs-were-glad-are-extinct/ https://www.terminix.com/blog/bug-facts/giant-prehistoric-bu... It was actually before dinosaurs (Devonian and Cambrian Periods).
- thaumasiotes 4y agoProbably not. Those large insects and other bugs could flourish because they didn't have effective competition. But increasing the oxygen level today isn't going to remove the ecosystem that prevents giant bugs from developing again. Analogously, there's nothing about the atmosphere preventing giant ground sloths from existing, but they nevertheless can't exist because they're not compatible with humans.
- ncmncm 4y agoThey can't exist because they were exterminated in the comet strike of 10,818 BCE. We don't know whether they would have coexisted with us. E.g., hippo population in Columbia is exploding. Megatherium sp. coexisted with hunter-gatherer humans for at least thousands of years. Horses and camels can coexist with humans. They too were obliterated in the Americas by the comet strike. But we anyway know people did hunt all of them, before that.
- abirch 4y agoIf you happen to have an article of converting sea water to methane, please post. My searches bring back methane dissolved in sea water and I'm curious where the carbon originates.
- gpcr1949 4y agoi think parent refers to the sabatier process, so the source of carbon is concentrated CO2 externally provided, not from seawater
- hannob 4y agoYou're converting Sea water to water (desalination) and then do electrolysis to get H2. You need to get CO2 from somewhere, you can use Direct Air Capture technology to get it from the air. Then you do this: https://en.wikipedia.org/wiki/Sabatier_reaction https://en.wikipedia.org/wiki/Sabatier_reaction This is all known technology, the problem is it's not very efficient. Ultimately the discussion in climate tech circles these days is usually that most people think you'll rarely ever do this. Whenever you can you'll use something more direct, like using Hydrogen directly as an energy carrier.
- dr_dshiv 4y agoI love promoting the fact that RF (13.56 MHz) can directly electrolyze saltwater without electrodes (and without desalination). The process was discovered by an amateur radio technician and it was treated like pseudoscience because of breathless local news coverage that made it sound like it was a fuel source. The YouTube video (“burning saltwater”) is a classic—but there still isn’t a proper study on the efficiency of the process. (The radio technician, John Kanzius, died of cancer). https://youtu.be/Tf4gOS8aoFk https://youtu.be/Tf4gOS8aoFk Edit: here is a scientific paper characterizing the process, which is pretty interesting. No calculation of efficiency, however. https://iopscience.iop.org/article/10.1088/0963-0252/22/1/015010/meta?casa_token=EfNq4b4UMIsAAAAA:Sdsa3oBsFnR8sIGqTwVM5ejRqm_wziykIAGivV4-wN6hxMHvqoMZgJC2-TTmN5VHYW5Sj_0E4A https://iopscience.iop.org/article/10.1088/0963-0252/22/1/01...
- 4y ago
- hannob 4y agoWe already have all the ingredients to turn CO2+H2 into Methanol without an intermediate step turning it into Methane. There are already a few production plants, e.g. one by Carbon Recycling International. It's not super efficient, but I am pretty sure you're not going to improve that by introducing an intermediate step.
- ascar 4y ago> It's not super efficient, but I am pretty sure you're not going to improve that by introducing an intermediate step. What's the foundation of that argument? An intermediate step that's achieved more efficiently and allows for a more efficient follow-up certainly can improve the efficiency of the overall process compared to one with less steps?
- ABCLAW 4y agoMost chemical synthesis steps produce side products. More steps means more %yield loss. If it's possible you go from A->B at 80% efficiency. If we compare this with A->C then C->B need to be nearly twice as efficient to provide a better yield. Remember these steps include losses due to non chemical reasons. You might have issues with your reactors or transferring the solution to a new reaction chamber might incur losses, etc. In most complex organic synth situations, the full synthesis will be 8-20 steps or so, so we're talking about yields of %efficiency^x. Lowering X helps a ton. In short, the alternate route needs to be really good to justify additional steps.
- criddell 4y ago> I am pretty sure you're not going to improve that by introducing an intermediate step Isn’t that the entire reasons catalysts are so valuable?
- ClumsyPilot 4y ago> It's not super efficient, but I am pretty sure you're not going to improve that by introducing an intermediate step. Perhaps we could so with a llittle self-awareness? To come here and simply state that all these PHDs develop a new process while you here rest in certainty that it is doomed to failure. Without demonstrating any understanding of catalysts or anything beyong highschool chemistry. Without presenting any evidence or agument except 'extra step is bad'
- photochemsyn 4y agoTraditional methane-to-methanol with carbon monoxide intermediate (based on steam reforming of natural gas): CH4 + H2O → CO + H2 CO + 2 H2 → CH3OH Direct reduction of CO2 to methanol without going through the methane, an already established technology (Fischer-Tropsch type chemistry): CO2 + 3H2 → CH3OH + H2O Methanol is a common feedstock for further chemical synthesis (such as making high-octane gasoline), so this is an option for fuels from direct air capture of carbon dioxide & electrolysis of water for hydrogen. Two methanol molecules are dehydrated to form dimethyl ether (CH3-O-CH3) as the initial step: > "Methanol can be used to make a gasoline product. The process uses a special zeolite catalyst with pore size such that molecules up to C10 can get out of the catalyst. Larger molecules cannot be made with this process; therefore, a product is made with no carbon molecules greater than C10, which boils in the gasoline range. In this process, aromatics and branched-chain alkanes are made, which means the MTG process produces very high octane gasoline. Gasoline is the only product." https://www.e-education.psu.edu/egee439/node/679 https://www.e-education.psu.edu/egee439/node/679
- adrian_b 4y agoBesides being relatively easy to convert into a gasoline product, methanol is also a convenient fuel for fuel cells, for direct conversion with high efficiency into electrical energy. When used for fuel cells, methanol does not have the storage problems of hydrogen, even if any equipment using methanol must be designed carefully, to avoid any leaks, which are dangerous because methanol is toxic and may cause blindness when ingested or absorbed through the skin.