3 ms·
> Is there any evidence that chips degrade in such a way? As far as I can see, the answer is yes[1]: The relationship between integrated circuit failure rates
by magicalhippo 4y ago
> Is there any evidence that chips degrade in such a way?
As far as I can see, the answer is yes[1]:
The relationship between integrated circuit failure rates and time and temperature is a well established fact. The occurrence of these failures is a function which can be represented by the Arrhenius Model. Well validated and predominantly used for accelerated life testing of integrated circuits, the Arrhenius Model assumes the degradation of a performance parameter is linear with time and that MTBF is a function of temperature stress.
However, the dramatic acceleration effect of junction temperature (chip temperature) on failure rate is illustrated in a plot of the above equation for three different activation energies in Figure 2. This graph clearly demonstrates the importance of the relationship of junction temperature to device failure rate. For example, using the 0.99 ev line, a 30° rise in junction temperature, say from 130°C to 160°C, results in a 10 to 1 increase in failure rate.
Wikipedia has an overview of the the Arrhenius equation[2].
Now, as you probably know most complex chips like GPUs and CPUs have built-in thermal management which prevents the junction temperature to rise above some limit, which one would assume is set at a point which reasonably guarantees a decent lifetime.
However, according to this, chips that have experienced less heat should, on average, live longer.
[1]: https://www.ti.com/lit/an/snva509a/snva509a.pdf https://www.ti.com/lit/an/snva509a/snva509a.pdf
[2]: https://en.wikipedia.org/wiki/Arrhenius_equation https://en.wikipedia.org/wiki/Arrhenius_equation
- Sakos 4y agoI think it's weird how so many people seem to think solid state parts or chips can't fail due to lifetime/heat/use. They don't have obviously moving parts like a fan, but that doesn't mean its materials can't degrade.
- ip26 4y agoThey are over-designed enough that failure is quite uncommon for most people.
- Sakos 4y agoI've seen enough failed parts that I know this is misleading if not outright incorrect. It happens. We all have so many electronic devices, many of which we keep for a long time, that the likelihood of your average consumer experiencing a chip failure of some kind is fairly high (over a long enough period of time, probably even guaranteed). Yet for some reason people keep painting it as this statistical impossibility. It's simply not that rare.