4 ms·

I've tried compressed air. I still suspect mechanical wear. The port is after all, extremely small and intricate and of questionable design.

• LinAGKar 4y ago
  I don't know if that's enough, there wouldn't be much airflow at the bottom of the port. I've used a needle to clear out the compressed lint stuck at the bottom, and that made it hold the plug much better. But I suppose it could be mechanical, though that hasn't been my experience.
  • globular-toast 4y ago
    I had the same experience. I thought the USB-C plug was terrible and I was cursing it for being so badly designed. I tried different cables but even the better ones (better in terms of not falling out) eventually would fall out. I then used a pin to mechanically remove the lint from the port and I was amazed at how much came out! After that the plugs went in so much further and are completely secure. Nowadays I don't get so much lint build up, probably because I work from home. Compressed air will never get it out. It gets really compacted in there. Don't be afraid of using a needle, the port is quite rugged. Just avoid the contacts in the middle.
    • grumpyprole 4y ago
      Thanks for the tip! I will try a needle and see if it helps.