5 ms·
Chestnut Tools Universal Sharpener – Popular Woodworking Magazine (2016)
- IgorPartola 4y agoDoes it allow you to fix the angle of the edge? I have used a number of sharpeners that don’t and I am just not experienced enough to get a consistent angle every time.
- causi 4y agoYeah I don't think I've ever used a sharpening system that let me go from "well at least it cuts things now, that's better" to shaving-sharp.
- IgorPartola 4y agoThere do seem to be systems like this which basically hold the blade at a fixed angle as you drag it over a diamond surface.
- mywittyname 4y agoPart of this is because it takes a lot of work to get a blade shaving sharp, especially hardened tool steel. However much effort you put into it initially, quadruple it. That's why professionals use machines to sharpen their tools.
- diab0lic 4y agoThere are plenty of angle guides that’ll help you set a specific angle. They tend to be object specific though because they typically involve clamping the blade to hold it in a fixed position. For example the Lansky and Worksharp Precision Adjust work for knives but not chisels. The Veritas Mk ii works for chisels and planes.
- deleted 4y ago[deleted]
- peatmoss 4y agoStrange that this came up on HN. I do hand tool woodworking and respect Chris Schwarz a lot (have a few of his books). I had not seen this gizmo before. I’m curious to try it now. Looks like it’s still sold at Lee Valley.
- geophile 4y agoMaybe not a coincidence. For some reason, Facebook has been showing me lots of woodworking videos and books lately. And this has some relevance for me. I did notice multiple posts pushing books by Chris Schwarz, and now I see this comment. So I'm wondering if Mr. Schwarz is simply buying ads, and social media is doing its thing.
- saalweachter 4y agoIf you don't block ads, I highly recommend clicking on the weird ones everyone once in awhile. For about six months 80% of my ads were weird crystal figurines and other art pieces being sold for five figures. I kept clicking, and the advertisers fell over themselves to show me more of them. It delighted me every time I saw an abstract sculpture selling for more than my car, or a three story nativity carousel, both because it was fun to click through and look at them, and it was amusing to imagine how hard the ad engine wanted to sell me a 5-figure tchotchke for probably a 10% CPA commission. I also had a fun period where I indicated I was interested in buying -- functional! -- windmills. Be careful about clicking on anything you'd actually like to buy, though, like woodworking tools -- eventually you'll see something too good to pass up.
- mywittyname 4y agoI click on for lingerie for specifically this reason. If you're going to see an ad every 10 seconds, you might as well enjoy what you're looking at.
- peatmoss 4y agoI’m already spectacularly in the marketing cohort for all things woodworking. It’s possible Chris is buying SEO and marketing, but given his self-described anti-corporate anarchism, I sort of doubt it.
- PeterWhittaker 4y agoI carry one of these with me pretty much all of the time. I tend to use my knife as a multi-tool and having the sharpener with it is handy. Works well on the machete too, and I've occasionally used it on kitchen knives (I find it both more effective and easier to use than my chef's steel, but I've never quite figured the hang of the steel).
- diab0lic 4y agoI find the best way to think about a honing steel is that you’re micro beveling the edge. [0] The images there help develop an intuition of what angle will work well. That said it may be irrelevant if your universal sharpener is doing the trick. :) [0] https://scienceofsharp.com/2018/08/22/what-does-steeling-do-part-1/amp/ https://scienceofsharp.com/2018/08/22/what-does-steeling-do-...
- rob74 4y agoThere seem to be several materials colloquially called "carbide". The one in this article is (I assume) Tungsten carbide. The one I first thought of when reading the article (being old enough to have used a carbide lamp while visiting a cave) is however https://en.wikipedia.org/wiki/Calcium_carbide https://en.wikipedia.org/wiki/Calcium_carbide. Any more candidates?
- showerst 4y agoThere's a whole variety of carbide matrices/coatings used for insert-tooling for machining. They change the binder and coating to alter the properties a bit. TiC (titanium carbide), Ti(C)N (titanium carbide-nitride), TiAlN (titanium aluminum nitride), etc. The tend to all be referred to as 'carbide inserts' unless you're distinguishing between each other specifically. Pretty cool stuff!
- gitpusher 4y agoHere's a fun, hand-wavey description of the process from Kennametal (a popular manufacturer of carbide insert tooling): https://www.youtube.com/watch?v=Vfc9cQaE8-g&t=480s https://www.youtube.com/watch?v=Vfc9cQaE8-g&t=480s
- raintrees 4y agoStill available: https://www.leevalley.com/en-us/shop/tools/sharpening/files-and-hones/66738-universal-sharpener?item=09A0332 https://www.leevalley.com/en-us/shop/tools/sharpening/files-...
- GeneT45 4y agoI have a similar tool called a 'Speedy Sharp' - I think it was about $5. I like it for hasty sharpening at the expense of removing what I'd consider 'too much' metal. Much more than a conventional stone (and hence, much faster). I would never touch a precision edge, such as a plane iron with one. I have a drawer-full of sharpening gizmos, but after many years I'm convinced that there's really no substitute for stones - although there are poor to great stones. They all require some understanding of developing an edge, particularly if a fine edge is wanted. Probably the easiest (for knives) is the Spyderco Sharpmaker. Probably the best is anything that helps you hold an angle, high quality, flat, stones, and developing a little skill.
- _whiteCaps_ 4y agoI came here to write almost the exact same comment. This tool can take metal off in shavings - great for repairing the edge of a rusty machete. When I picked it up at Lee Valley they warned me not to use it on kitchen knives.
- deleted 4y ago[deleted]