4 ms·

We're talking about 0.3 micron measurements because the input value for his numbers is the efficiency of the filters in removing 0.3 micron particles (99.5 vs 9

We're talking about 0.3 micron measurements because the input value for his numbers is the efficiency of the filters in removing 0.3 micron particles (99.5 vs 99.95). The author claimed the difference between the purified air, as a percentage of total air volume, was small. He used percentages expressed as a decimal to make that difference look small (0.9005 vs 0.90005). But a clever observer would translate those numbers back into their percentages (90.05 vs 90.005), start applying some math (i.e. 100000 x 0.9005 vs 0.90005), see the 10x difference, understand how that 10x different is going to multiply over time in a chaotic system, check the data to see if that's true, and then throw away the author's point.

amluto 4y ago
Multiplying .9005 and .90005 by 10000 does not actually cause a 10x difference to appear. No, really, try it! If your goal is to play with numbers, you could raise them both to a large power. You would discover that the ratio between them increases exponentially, but this would pale in comparison to the fact that both results would exponentially approach zero much faster than the ratio would increase.
- etchalon 4y ago
  10000 x .9005 is 9,005. 10000 x .90005 is 9,000.5. Meaning that the first filter left 5 particles vs the second filter leaving .5 particles. A 10x difference. The goal isn't to "play with numbers" but to understand why/if the relative effectiveness of a filter results in a substantive difference in air quality. The data shows it does.
  - amluto 4y ago
    Extraordinary claims require extraordinary evidence. The data shows a huge difference which cannot be explained by the difference between 5 particles and 0.5 particles. As noted in the article, the Wirecutter does not explain its methodology or give particularly complete data, and what explanations they do give about filtration make no sense.
    - etchalon 4y ago
      It's a 10x difference in filtration efficiency, combined with a CADR difference between the two units. I don't understand why you think more of an explanation is required?
      - amluto 4y ago
        There is a 10x difference between (1-efficiency) for the two filter media choices. Explanation needed as to why this is at all relevant. Your comment is like observing that car A burns 87 octane gasoline and another burns 89 octane gasoline and claiming, without explanation, that one of them accelerates faster because (90-octane) is 3x lower. hint: the bigger purifier wins because it has a more powerful, more power hungry fan pushing air through it. Its performance might be further improved (depending on the fan and motor characteristics) by putting a less efficient, lower pressure drop filter in because more air would go through it per unit time. Meanwhile, two IKEA filters will outperform it in every measure, including cost, noise, and power consumption. But their efficiency will still be lower.
  - jefftk 4y ago
    > The data shows it does As I described above [1] the data show that the difference between 70% and 99.95% matters, not that the difference between 99.5% and 99.95% does. (And that's ignoring difference in flow rates, which is also very large.) [1] https://news.ycombinator.com/item?id=31823047 https://news.ycombinator.com/item?id=31823047
    - etchalon 4y ago
      The 70% and 99.95% difference is because of the 10x filtration efficiency difference, combined with the CADR difference. This is very straight-forward.
      - jefftk 4y ago
        The "10x" you've been referring to is about the difference in how many particles make it through filters of 99.5% vs 99.95% efficacy [1], not 70% vs 99.95%, which would be 600x [2]. [1] (1−.995)÷(1−.9995) [2] (1−.7)÷(1−.9995)
        etchalon 4y ago
        "CADR" is a word I included for a reason.

amluto 4y ago

Multiplying .9005 and .90005 by 10000 does not actually cause a 10x difference to appear. No, really, try it! If your goal is to play with numbers, you could raise them both to a large power. You would discover that the ratio between them increases exponentially, but this would pale in comparison to the fact that both results would exponentially approach zero much faster than the ratio would increase.

etchalon 4y ago
10000 x .9005 is 9,005. 10000 x .90005 is 9,000.5. Meaning that the first filter left 5 particles vs the second filter leaving .5 particles. A 10x difference. The goal isn't to "play with numbers" but to understand why/if the relative effectiveness of a filter results in a substantive difference in air quality. The data shows it does.
- amluto 4y ago
  Extraordinary claims require extraordinary evidence. The data shows a huge difference which cannot be explained by the difference between 5 particles and 0.5 particles. As noted in the article, the Wirecutter does not explain its methodology or give particularly complete data, and what explanations they do give about filtration make no sense.
  - etchalon 4y ago
    It's a 10x difference in filtration efficiency, combined with a CADR difference between the two units. I don't understand why you think more of an explanation is required?
    - amluto 4y ago
      There is a 10x difference between (1-efficiency) for the two filter media choices. Explanation needed as to why this is at all relevant. Your comment is like observing that car A burns 87 octane gasoline and another burns 89 octane gasoline and claiming, without explanation, that one of them accelerates faster because (90-octane) is 3x lower. hint: the bigger purifier wins because it has a more powerful, more power hungry fan pushing air through it. Its performance might be further improved (depending on the fan and motor characteristics) by putting a less efficient, lower pressure drop filter in because more air would go through it per unit time. Meanwhile, two IKEA filters will outperform it in every measure, including cost, noise, and power consumption. But their efficiency will still be lower.
- jefftk 4y ago
  > The data shows it does As I described above [1] the data show that the difference between 70% and 99.95% matters, not that the difference between 99.5% and 99.95% does. (And that's ignoring difference in flow rates, which is also very large.) [1] https://news.ycombinator.com/item?id=31823047 https://news.ycombinator.com/item?id=31823047
  - etchalon 4y ago
    The 70% and 99.95% difference is because of the 10x filtration efficiency difference, combined with the CADR difference. This is very straight-forward.
    - jefftk 4y ago
      The "10x" you've been referring to is about the difference in how many particles make it through filters of 99.5% vs 99.95% efficacy [1], not 70% vs 99.95%, which would be 600x [2]. [1] (1−.995)÷(1−.9995) [2] (1−.7)÷(1−.9995)
      - etchalon 4y ago
        "CADR" is a word I included for a reason.