3 ms·
I'd not even worry about the steel used in his typewriter. Paper is made through an energy and chemically intensive process. I'm sure someone can math out the
by cogman10 4y ago
I'd not even worry about the steel used in his typewriter.
Paper is made through an energy and chemically intensive process. I'm sure someone can math out the kwh that go into each sheet of paper, but it is far from 0. Paper costs anywhere from $0.005 -> $0.02 per sheet and that price point is going to be very closely tied to the energy used to produce that paper.
Here in Idaho, power goes for around $0.11/kwh and is primarily non-co2 emitting sources (hydro is the big one with nuclear, solar, and wind up next. Coal exists on our grid but isn't the prime source of power here). So, that'd put the power cost for one sheet of paper at a max of 45 -> 181wH.
If he wants to be energy conscientious, then I'd argue a raspberry pi with a low power oled display will beat the pants out of paper and pen in terms of energy consumed per page. Especially since writing with a keyboard is much faster than pen/paper or a typewriter.
Rpi = ~5W of consumption
OLED display = ... idk, can't really find good numbers on this but certainly less than 100W which is where a 65' oled display maxes out. For a 13' display, that's what, ~9W?
So, with a 15W system, you can write for 3 hours before you get to the max possible energy cost of a piece of paper. I'm guessing the author can use more than 1 piece of paper in that timeframe.
And, of course, you can pair such a system with a solar + battery setup to get completely coal free writing (except for the cost to produce the chips for the rpi, display, solar, and battery)
- bee_rider 4y agoIt is an interesting comparison, but if you want to be fair to him, it would make more sense to make generous assumptions for the energy cost of a piece of paper, rather than guessing at a max. The solar power for the pi -- we could be generous to him again, and say that it is hypothetically possible to power either setup with solar, although there is something to be said for the fact that he has direct control over what he plugs his pi into. On the other hand, a chalkboard could be used for first drafts.
- cogman10 4y agoYeah, I tried to be as fair as possible with the energy consumption comparisons, inflating and rounding up for the r-pi and couching all statements about paper as "this is going to be the max". IDK if, without an in depth study, there's a better way to to figure out wH per piece of paper. My inclination is the cost based method I used will end up being in the same order of magnitude. Obviously, I can't prove that. The reason I think it'll be pretty close is paper is, for the most part, highly mechanized so the cost of human labor will be somewhat low. Further, profit margins are (I'm assuming) somewhat low (lots of competition). So, pull those two things and what are you looking at? Mostly shipping and processing costs which go pretty much directly to the power used to produce a piece of paper.